Best Thermal Conductive Tape

Peter | 06-08-2025

You will find our hand-picked selection of Best Thermal Conductive Tape below. You have a wide variety of choices of brands such as HOAOH,Nicelux,AVNTKER,Outus,PHITUODA,SOBEIT available to you as a result of the fact that each one of them has a unique pricing, look, and feel. Continue reading for an in-depth analysis in our Best Thermal Conductive Tape buying guide!

Our experts tested a variety of Best Thermal Conductive Tape on the market. Right at the top of the list is HOAOH Best Thermal Conductive Tape. Check out some more of our favorites below, and read some valuable insight from our experienced editors.

Editor's Choice
HOAOH Thermal Adhesive Tape, 25m x 10mm x 0.20mm Double Side Thermal Tapes Cooling Heatsink Pad
HOAOH Thermal Adhesive Tape, 25m x 10mm x 0.20mm Double Side Thermal Tapes Cooling Heatsink Pad
Premium Pick
30 Pieces 2.6 x 0.8 Inch Silicone Thermal Pad Reusable Thermal Conductive Silicone Pad Each Thick
30 Pieces 2.6 x 0.8 Inch Silicone Thermal Pad Reusable Thermal Conductive Silicone Pad Each Thick
Budget Pick
Thermal Adhesive Tape (40mmx10 Meters 0.3mm Thickness) Double Side Adhesive Thermal Conductive Tape
Thermal Adhesive Tape (40mmx10 Meters 0.3mm Thickness) Double Side Adhesive Thermal Conductive Tape

Top 10 Best Thermal Conductive Tape

We researched and compared the top products in the Best Thermal Conductive Tape category to provide you with these recommendations.

1. HOAOH Thermal Adhesive Tape, 25m x 10mm x 0.20mm Double Side Thermal Tapes Cooling Heatsink Pad

  • Thermal Adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • EFFICIENT THERMAL CONDUCTIVITY - The Thermal Pad based on silicone & a special filler outperforms generic and performance pads by far. The Thermal Conductivity amounts to 2.0 W/mK.
  • Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression. Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation
  • Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.

2. Thermal Adhesive Tape (40mmx10 Meters 0.3mm Thickness) Double Side Adhesive Thermal Conductive Tape

Thermal Adhesive Tape (40mmx10 Meters 0.3mm Thickness) Double Side Adhesive Thermal Conductive Tape
9.5

Nicelux

Check Price On Amazon
  • Thermally conductive adhesive tape is made of advanced thermal conductive PSA. They satisfy the demand of high adhesion and excellent thermal conductive efficiency by providing a preferential heat-transfer path between heat-generating components and heat sink or other cooling devices.
  • High tacky thermal conductive PSA. Only pressure is needed to form an excellent bond and thermal interface, effectively replace the grease and mechanical fixation.
  • The performance of thermal conductivity, insulation, buffer and high tacky make it as the best choice for electronic application.
  • Flexible and conformable. Ideal for uneven surfaces.
  • Widely used in: Assembly of LED light bar module and metal frame bezel. Assembly of DDR-RAM module and heat sink. Electronic components - IC, COP, CPU, MOS, etc. M/B, PS, PCB, LCD, PDP, PC, etc.

3. Double Sided Tape 1inch x 66Feet Thermal Tape Heavy Duty Super Strong Adhesive, Insulation Heat

Double Sided Tape 1inch x 66Feet Thermal Tape Heavy Duty Super Strong Adhesive, Insulation Heat
9.1

Avntker

Check Price On Amazon
  • Industrial Grade Material: Our heavy duty double-sided tape is crafted from top-quality silicone and acrylic glue and a special thermally conductive filler. This ensures high thermal conductivity and strong adhesion. It can firmly attach to diverse surfaces and electronic components, enabling efficient heat transfer and reliable performance in applications. Whether attaching heatsinks to chips or bonding other heat-producing parts, this 2-sided thermal tape offers a stable and secure connection.
  • Excellent Performance: This two sided adhesive tape excels in heat transfer. With a high thermal conductivity coefficient, it rapidly and efficiently dissipates heat, keeping electronic components at optimal temperatures. Besides, it has strong adhesion that endures high temperatures, humidity, and mechanical stress. It offers excellent electrical insulation to prevent short circuits and is resistant to aging, chemicals, and abrasion, ensuring durability and reliability in various environments.
  • Thermal Management: This double sides tape minimizes the impact of heat on the performance and longevity of components. It can be employed to attach heat sinks to chips, CPU, GPU, HDD, SSD drive, hard disk, cooler, module, transistors, and other heat-generating components in computers, laptops, servers, and gaming consoles. Additionally, it is suitable for LED lighting fixtures, power supplies, circuit boards, 3D printers, and other electronic devices where efficient heat dissipation is crucial.
  • Wide Application: This dual faced tape is a highly versatile product. It can not only connect heat sinks for efficient heat transfer, but also firmly hold carpets to prevent slipping. It's great for pasting posters and photos, and for installing signposts and decorative graphics. It's an excellent choice for DIY projects like craft and model making, and for attaching small decorative items. In woodworking projects, it can be used in splicing, machine cutting, CNC work, milling and anchoring.
  • Package Included: The entire roll of double stick tape measures 25mm (1 inch) in width, 20m (66 feet) in length, and 0.2mm in thick, excluding the thickness of the blue thin film. This two way tape has super sticky and can be readily mounting to the surfaces of various materials, such as glass, wood, metal, aluminum, paper, foam, walls, and fabric. You can cut it into the sizes and shapes as per your usage needs and use it effortlessly without the need for complex tools or professional skills.

4. 30 Pieces 2.6 x 0.8 Inch Silicone Thermal Pad Reusable Thermal Conductive Silicone Pad Each Thick

  • Thermal Conductivity: quality thermal silica gel material with 6.0 walt/ thermal conductivity, our thermal pad nicely improve the heat transfer between the electronic elements and effectively cool the temperature down in seconds
  • Safety and Stability: electrical insulation, in -40 degree Centigrade - 200 degree Centigrade will not melt, wear-proof, anti-static, fire retardant, buffering, reliable, odorless, no corrosion, no stimulation, no damage to metal materials
  • Suitable Size: the thermal pads are about 2.6 x 0.8 inch, totally 30 pieces suitable to fill contact surfaces gap, a nice assistant for both beginners and professionals
  • Easy to Install: you can select the most suitable thickness and cut the required sizes; Appropriate replacement for traditional heat sink compound grease paste
  • Widely Application: nicely replaces traditional heatsink compound grease paste, suitable for control board, motor, electronics, CPU, GPU, heat sink, power LED, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC and any cooling modules

5. PHITUODA Thermal Conductive Tape, (10mm Width x 0.20mm Thickness x 25 Meters) Double Side Thermal

PHITUODA Thermal Conductive Tape, (10mm Width x 0.20mm Thickness x 25 Meters) Double Side Thermal
8.7

Phituoda

Check Price On Amazon
  • Package Content: 1 roll of Double-sided thermal tape, which the edge is neat and flat. Total size is 25m x 10mm x 0.2mm (Length*Width*Thickness), Thermal conductivity 1.5 W/m-k.
  • Designed for Firmly: Due to strong-strength adhesive ability, the thermal tape can firmly fix the heatsinks to the heating element. You can apply it with confidence without worrying about shifting and falling off.
  • High-Quality Material: Made of a mixture of acrylic polymer, thermally conductive ceramic powder and silicone adhesive, Thermal tape has high heat conductivity and is electrically insulated, it can well help your electronic products to dissipate heat within 80-120C temperature
  • Wide Application: It's suitable for LED, IGBT, IC Chip, Computer CPU, GPU, Modules, Raspberry pi, Electrically Insulated, motor controller, communication equipment, Video Card RAM, DDR Memory Modules, SSD, power semiconductor, MOS tube. Widely used in LED lighting, hardware industry, printing industry and other circuit boards.
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale!

6. Thermal Adhesive Tape, Double Side Thermal Conductive Tape for Heatsink, LED, IGBT, IC Chip,

  • GOOD ADHESION - This heatsink tape has strong adhesion which makes cooling random objects so much easier as it combines the heat sinks and electronic devices into it. it is no longer need to fix the electronic devices and radiators with instrument or liquid adhesive. More easy to use.
  • HIGH THERMAL CONDUCTIVITY----The thermal tape made of acrylic polymer which filled with heat conductive ceramic powder and silicone adhesive compound and into. Thermal adhesive tape has high thermal conductive and insulating properties, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120C ).
  • WIDELY APPLICATION----The double side thermal tape featuring electrically insulated , thermally conductivity and strong adhesion is ideal for Heatsink, LED Strips, IGBT, IC Chip, Computer CPU, GPU, Modules, MOS Tube, SSD Drives. This is a must have product for electronics enthusiasts.
  • MEET ROHS & UL THE ENVIORMENT ----The heatsink tape has high thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands. The thermal tape with excellent flexibility can use in uneven surface. Heat sink tape with high reliability and thermal conductivity has excellent flexibility, adhesion, self adhesive and high compressibility can replace the hot melt adhesive, screw, fastener for fixing mode.
  • EASY TO USE----Stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation. Just need to press it slightly, this adhesive tape sticks incredibly well and works right away, no curing time. Once applied, you do not need to apply it again as it will last at least for 5 years.

7. HPFIX Thermal Adhesive Tape 30mm by 25M, High Performance Thermally Conductive Tape Apply for

  • HPFIX double side thermal adhesive Tape is a simple and practical heat conductive tape, very easy to use, even for beginners.
  • Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better.
  • HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands.
  • Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power.
  • Thermal tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120C ).

8. Lependor 15mm x 25m Thermal Conductive Tape Double-Sided Adhesive Cooling Tape for Heat Sink LED

  • Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickiness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
  • With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products , like for LED strip, CPU, GPU, Modules, SSD Drives.
  • Easy to use - Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
  • Thermal Conductivity:1.5 W/m-k. Long term heat resistant 120C, short term heat resistant 180C
  • Size - Width15mm xLength 25m (0.59 in x 82 ft). Material - fiber glass + blue rubber, strong adhesive.

9. A ADWITS [ 6-Pack ] Thermal Conductive Silicone Pads, Soft Safe Simple to Apply for SSD CPU GPU LED

A ADWITS [ 6-Pack ] Thermal Conductive Silicone Pads, Soft Safe Simple to Apply for SSD CPU GPU LED
7.9

A Adwits

Check Price On Amazon
  • Excellent thermal conductivity: Made of thermal silica gel with heat conductivity of 6.0 W/Mk
  • Great safety and stability: electrical insulation, in -40 - 200 will not melt. Wear Resistant, anti static, fire retardant, buffering, no toxic, odorless, no corrosion, no stimulation, no damage to metal materials
  • Fits for Control board, motor, electronics, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC SMD DIP and any cooling modules
  • Packed with 6 thermal pads, three sizes, each with 2 pieces: 20x67x0.5mm, 20x67x1.0mm, 20x67x1.5mm
  • Easy to install, you can select most suitable thickness and cut the required sizes. Great replacement for traditional heat sink compound grease paste

10. DKARDU 15mm x 25m Thermal Conductive Double Side Adhesive Tape Thermal Adhesive Tape Cooling Tape

  • PARAMETER: :Thermal Conductivity:1.5 W/m-k; Long term heat resistant 120C; short term heat resistant 180C; Width:15mm/0.59inch; Length:25m/82ft
  • MATERIAL: :Made of fiberglass that fills Thermally conductive ceramic powder for flexibility of thermal conduction, insulation, strong stickiness, softness, compression
  • EASY TO USE: :Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink
  • APPLICATION: :Widely used for LED, power supply module, Computer CPU, GPU, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip, DDR Memory Modules, SSD drives.
  • PACKAGE CONTENT: :1 x Double Side Adhesive Thermal Conductive Tape 15mm x 25m, 1 x 1.5m Measuring Tape

Peter

Related Posts