Best One Piece Scope Mount

Peter | 13-12-2023

With so many Best One Piece Scope Mount brands on the market – from prominent names like Monstrum,MIZUGIWA,Traditions,Thompson Center,Dasen to smaller manufacturers – making the right choice can feel overwhelming. But we’re here to help simplify your search for the best product.

We extensively tested and evaluated dozens of top-rated Best One Piece Scope Mount across various price points, spending over 100 hours comparing the contenders side-by-side. Based on our in-depth first-hand research, we compiled this list of stand-out Best One Piece Scope Mount to consider. Our top recommendation is Monstrum Best One Piece Scope Mount for its uncompromising quality and performance.

Below you’ll discover more of our favorite Best One Piece Scope Mount picks. And be sure to consult our buying guide for expert insights on selecting the ideal product for your individual needs and budget. With us guiding your decision, you can shop confidently knowing you’ve chosen an exceptional Best One Piece Scope Mount you’ll truly love.

Editor's Choice
Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black
Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black
Premium Pick
MIZUGIWA One Piece High Profile Magnum Airgun Scope Mount with Stop Pin
MIZUGIWA One Piece High Profile Magnum Airgun Scope Mount with Stop Pin
Budget Pick
MIZUGIWA One Piece High Profile Scope Mount for Picatinny Weaver Rail 1
MIZUGIWA One Piece High Profile Scope Mount for Picatinny Weaver Rail 1" Dia

Top 10 Best One Piece Scope Mount

We researched and compared the top products in the Best One Piece Scope Mount category to provide you with these recommendations.

1. Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black

Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black
9.8

Monstrum

Check Price On Amazon
  • Dual ring scope mount for mounting standard 1 inch tube rifle scopes
  • Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
  • Mounts to any flat top Picatinny rail equipped rifle
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
  • 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

2. MIZUGIWA One Piece High Profile Magnum Airgun Scope Mount with Stop Pin

MIZUGIWA One Piece High Profile Magnum Airgun Scope Mount with Stop Pin
9.5

Mizugiwa

Check Price On Amazon
  • One Piece Scope Mount with Integral two 1" Rings
  • 4 Clamping Screws,Fit 11mm Dovetail
  • Fits all scopes with a one inch body tube, Full length 4 inch
  • Threaded stop pin can be easily activated
  • Great for use on high power magnum air rifles

3. MIZUGIWA One Piece High Profile Scope Mount for Picatinny Weaver Rail 1" Dia

MIZUGIWA One Piece High Profile Scope Mount for Picatinny Weaver Rail 1
9.1

Mizugiwa

Check Price On Amazon
  • One Piece Scope Mount with Integral two 1" Rings
  • Mounts onto Picatinny/Weaver rails
  • 3 Clamping Screws
  • Fits all scopes with a one inch body tube
  • Full Length Locking Plate to Guarantee Easy Installation and Secure Fit.

4. Traditions Performance Firearms One Piece Scope Base for Traditions Break-Open Muzzleloader Rifles

Traditions Performance Firearms One Piece Scope Base for Traditions Break-Open Muzzleloader Rifles
8.9

Traditions

Check Price On Amazon
  • Weaver style aluminum base
  • One piece scope base
  • Fits Traditions break-open models
  • Blued finish
  • Includes mounting screws and wrench

5. Thompson Center One Piece Scope Base & Ring Combo, 1-Inch, High

Thompson Center One Piece Scope Base & Ring Combo, 1-Inch, High
8.7

Thompson Center

Check Price On Amazon
  • Lightweight, Machined, anodized billet aluminum
  • Specifically designed for optimal scope placement on the following rifle platforms: T/C encore, T/C triumph, T/C impact, T/C Omega
  • 1 inch high black scope rings
  • Designed for Use with Select Thompson/center rifle platforms

6. Dasen One-Piece Scope Mount with Bubble Level for Picatinny Rail Fits 1 inch /30mm Diameter

  • Made of aircraft grade aluminum alloy with a very high hardness,anti-knock design.
  • Upgraded bubble level to make it more visible on your rifle scope.
  • Front and Rear Top Rails can mount laser sight tactical flashlight or red dot sight.
  • One-piece mount gives you good position and there is no need to worry about alignment between the two mounts as this connection is permanent.
  • Once installed you should never have to trouble over a loose wheel.

7. Hammers One Piece Dovetail Scope Mount AM4L with Stop Pin for Magnum Airguns

Hammers One Piece Dovetail Scope Mount AM4L with Stop Pin for Magnum Airguns
8.3

Hammers

Check Price On Amazon
  • Solid one piece design and built-in threaded stop pin for max. holding power
  • Good for 1inch tube full size rifle scopes with objective OD(outside diameter) 40mm or less
  • Fits onto 3/8inch dovetail bases or grooved receiver top
  • 4 clamping screws at the bottom for max. holding power
  • Authentic airgun specialty Hammers products

8. Atom Optics 1 inch Scope Rings Mounts fit 11mm Dovetail Rails for Picatinny Rail Scope Rings High

Atom Optics 1 inch Scope Rings Mounts fit 11mm Dovetail Rails for Picatinny Rail Scope Rings High
8

Atom Optics

Check Price On Amazon
  • 1 inch scope rings mounts for 11mm picatinny weaver rails
  • Scope rings mount Dual ring for mounting standard 1 inch diameter tube scopes to Picatinny equipped
  • High Profile scope rings(item height:1.96/50mm"),center mirror height 1.28 inches
  • Strong and rigid design built to optimize the support and stability of your scope.
  • One piece mount 8 scope mounting screws that makes it easier to properly mount the scope

9. UTG 1PC High Profile Airgun Mount with Stop Pin, 1" Dia , Black

  • Precision Machined from Aircraft-grade aluminum alloy with anodized black matte finish
  • Complete with stop-pin for rock solid application
  • Ring base designed with locking Hex screws to tightly fit on mounts with airgun/.22 dovetail dimensions
  • Reversible locking plate to fit full range of airgun/.22 rails

10. Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount

Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount
7.7

Ade Advanced Optics

Check Price On Amazon
  • This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief.
  • ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher
  • Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.
  • The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings
  • Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty.

Peter

Related Posts