If you aren’t someone who makes frequent purchases, selecting the best Best Go Kart Torque Converter won’t be an easy chore for you. However, you shouldn’t be concerned because we have provided you with the most comprehensive list possible of the top Best Go Kart Torque Converter. Have a look at the products on our list, and pick the ones that appeal to you the most.
We researched and tested Best Go Kart Torque Converter in the market to get you this list. Our most recommended product is IPARTS EXPERT Best Go Kart Torque Converter. Check out our picks for all of our favorites, and be sure to read our buying guide to get all the information you need to make the best choice!
Editor's Choice
High Power 212CC Torque Converter 8.0 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35
Premium Pick
212CC Torque Converter Kit 30 Series 6.5 HP 3/4 Inch Go Kart Mini Bike 10T #40 41 420 Chain Predator
Budget Pick
212CC Torque Converter 6.5 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain
Top 10 Best Go Kart Torque Converter
We researched and compared the top products in the Best Go Kart Torque Converter category to provide you with these recommendations.
1. 212CC Torque Converter 6.5 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain
- TORQUE CONVERTER DIY MODIFICATIONS COMPATIBLEDIY Modifications fits for go karts and mini bikes and drift carts, such as BT200X, cx100, ct200u ex, Massimo Baja 200, doodlebug db30, mini-bike, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. Note This is not made by Comet, just the modification replacements for it. Cars mentioned above not included in package.
- REALLY WAKES UP THE BIKE This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. DIY modifications to your Mini Bike require some mechanical ability. I'm sure you can do it!
- BRING YOUR OFF-ROAD MACHINE TO LIFEThis TAV2 30 Series Go Kart Clutch Kit fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design.
- A HUGE IMPROVEMENT OVER THE OLD CENTRIFUGAL CLUTCHThis clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. On a lighter buggy or drift cart or mini-bike this will SMOKE your old centrifugal clutch.
- 30 SERIES TORUQE CONVERTER BELT FOR 6" DRIVEN Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".
- FOR YOUR CONVENIENCE THIS KIT COMES WITH1 x 3/4" Driver Pulley;1 x 5/8" Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware.
2. High Power 212CC Torque Converter 8.0 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35
- COMPATIBILITY: Designed for 212CC engines with 8.0 HP output, perfect for go-karts and mini bikes requiring a 30 Series torque converter
- SPECIFICATIONS: Features 3/4 inch shaft size with 10T 40/41 and 12T 35 chain options for versatile installation
- PERFORMANCE: High-power torque converter system delivers smooth power transfer and improved acceleration control
- COMPONENTS: Complete replacement set includes driver pulley and necessary hardware for proper installation
- DESIGN: engineered for reliable performance and consistent power delivery in recreational vehicles
3. 212CC Torque Converter Kit 30 Series 6.5 HP 3/4 Inch Go Kart Mini Bike 10T #40 41 420 Chain Predator
- Wide compatibility This 30 Series Torque Converter is suitable for small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75.Kart torque-converter 30 series fits all engines with a 3/4 inch straight crankshaft, works with small engines producing 6.5 HP (212cc).
- Superior qualityThis go-kart torque converter is made of high-quality iron and aluminum materials. It is lightweight, sturdy, and durable, allowing for higher speeds, smaller engines, and smoother acceleration, helping you gain more power.
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft, including: Briggs, Clinton, H'onda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
- Package Included 1 x 3/4" Driver clutch bore, 1 x Overall Diameter 6" (5/8" driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate.
- Buy with confidence Before purchasing, please confirm that the go-kart torque meets your requirements. If you encounter any problems during use, please feel free to contact us at any time, and we will provide you with a satisfactory solutio
4. VEVOR Go-Kart Torque Converter, 3/4" Go-Kart Clutch Kit, 30 Series Asymmetrical Driver Pulley
- 30 Series Go-kart Torque Converter: This 30-series go-kart torque converter kit features a drive pulley with 3/4 inch (19.05 mm) bore and a driven pulley with 5/8 inch (15.875 mm) bore, making it compatible with Comet 219552, Manco 5957, and Yerf Dog Q43201W. Ideal for restoring your engine to efficient operation, it reduces abnormal noise and ensures safe driving.
- Compatible with 2-8HP Small Engines: Suitable for 2-8 horsepower small engines, this torque converter clutch kit is perfect for go-karts, mini bikes, off-road and all-terrain vehicles, lawnmowers, and generators. Note: Check if your engine requires American or metric bolts for proper installation and secure assembly.
- Asymmetric Design, Enhanced Performance: Featuring an asymmetric design for the drive and driven pulleys, this go-kart clutch kit provides more power to your vehicle, increases torque transmission and ensures efficient operation. This kart torque converter kit facilitates quick engine starts or stops and contributes to reduced fuel consumption.
- High-Tooth Drive Belt: Equipped with a Model 725 high-toughness rubber belt designed for longevity, it withstands prolonged rotation without wear or breakage. The belt features deeper and more numerous teeth for a stronger grip, maintaining engagement with the drive pulley and driven pulley at varying speeds and preventing slippage.
- Robust Alloy Construction: The go kart clutch kit's components are crafted from heavy iron and aluminum alloy, featuring solid construction and superior heat dissipation. Finished with high-quality galvanized material, it provides enhanced rust resistance against oil and rain, extending the service life of the torque converter kit.
5. Torque Converter 30 Series Mini Bike 2-7Hp Go Kart CVT Clutch 3/4 inch 10T #40/41/420&12T #35 Chain
- Torque Converter Clutch Kit: SEHNSUCHT 3/4 CVT Torque Converter is designed to fit for Predator 212cc motor, for Comet TAV2, fit for Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. You can use it on all engines with 3/4 straight crankshaft, and it can also replace for Comet Manco Go Karts.
- Premium MaterialsEngine Compatibility: 3/4"shaft with flat key, 2-7HP(212cc) Horizontal Shaft Gas Engine. It is made of premium iron and aluminum to make sure it can be sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75.
- NOTEWhen installing the belt, please ensure that the end marked with an arrow is facing down!!!
- Belt for 6 Driven: Center to center of driver and driven: 6-15/16 to 7. Length: 27.76(70.5cm), width:3/4(1.9cm), outside circumference:27-23/64
- Package Include:2 sprocket teeth: 10 tooth sprocket for #40 #41 #420 chain and 12 tooth sprocket for #35 chain. Driven unit: overall diameter 6"(5/8" driven pulley), Driver clutch bore: 3/4". And also include belt, aluminum engine mount plate, built in jackshaft with sprocket(Chain not included), full Mounting Hardware Kit.
- Compatible withComet torque converter kits are fit for small vehicles, small tractors, riding lawnmowers, go karts, mini choppers, mini bikes, motorcycles, ATV and waterski winches. You can adjusted the engagement range from 1200RPM - Maximum 3100 RPM by changing out springs(not included) and other adjustments.(the engagement range of this kit is approximately 2350200 RPM)
6. GYMMEDS 30 Series Torque Converter 3/4" Bore Fit for Predator 212cc Engine CVT Clutch 10T #40/41/420
- 30 Series Torque Converter Clutch Kit This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft.This Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, BT200X, cx100, ct200u, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM - Maximum 3100 RPM by changing out springs (not included) and other adjustments.
- Widely Fitment&With 2 SprocketsRecommende fit for predator 212cc 6.5 hp go kart torque converter clutch all 2HP-7HP engines,3/4" Shaft with flat key.Includes 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts coleman mini bike.
- High Quality MaterialsOur Torque Converter is made of high quality iron and aluminum materials, light weight, durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
- Easy to Install:for your convenience Our kit comes with everything you need for a hassle-free installation, including 1 x 3/4" Driver Pulley, 1 x 5/8" Driver Pulley, 1 x Plastic Assy Cover, 1 x Aluminum Mounting Plate, 1 x Drive Belt, 1 x 10 Tooth Sprocket for #40/41/420 Chain, 1 x 12 Tooth Sprocket for #35 Chain (Chain not included), and 1 x Full Mounting Hardware.
- Including Two Screw KitsWe have two screw kits If you use the engines of American brand or American standard shaft thread (UNF) such as Honda, Preditor, or other not Metric standard thread shaft, please use this UNF screwes.if it not workes good please use the metric screws in other bag.
7. Torque converter for Predator 212CC 30 Series 3/4" Go Kart Clutch Kit 12T #35 and 10T #40 41 420
- Wide compatibilityThis 30 Series Torque Converter is suitable for small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Replaces Comet 219552A, 203814A, 219456A, 218352A, 218353A, TAV2 30-75.
- Superior qualityThis go-kart torque converter is made of high-quality iron and aluminum materials. It is lightweight, sturdy, and durable, allowing for higher speeds, smaller engines, and smoother acceleration, helping you gain more power.
- Toruqe ConverterLength: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"
- Package IncludedOur Torque Converter included 1X Drive belt, 1X Plastic Assy Cover, 1 x 3/4" Driver pulley, 1 x 5/8" driven pulley, 1X Aluminum Mounting Bracket Plate, 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for ##40/41/420 Chain(Chain not included), 1X Full Mounting hardware Kit.
- Buy with confidence Before purchasing, please confirm that the go-kart torque meets your requirements. If you encounter any problems during use, please feel free to contact us at any time, and we will provide you with a satisfactory solution.
8. VEVOR Torque Converter, 30 Series 212 Predator Torque Converter kit Go Kart, Mini Bike Comet Clutch
- Modified TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life.
- Updated Durable Belt: The new type of belt, go-kart asymmetrical belt 669, is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter.
- Quality Drive Clutch: We have a 3/4'' Driver Pulley and a 5/8'' bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems.
- Vehicle Fitment: The torque converter is compatible with 3/4" & 5/8" straight crankshaft. You can usually use it on 4-8 hp go-karts and motorbikes.
- Full Accessories: Our torque converter clutch has full accessories: 1 x 3/4" driver pulley. 1 x 5/8" bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware.
9. 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley 219552A for Comet Manco
- Fits for Comet Manco 212CC 3/4" Bore Max Torque, also fit for 196cc engines, but only for versions with a bore diameter of 0.75 (19.05mm). Not for versions with a bore diameter of 0.787 (20mm)
- Replace part number 219552A, 6" diameter, 3/4" Bore, 3/16" Key Way
- Used in go karts, mini bikes, and lawn mowers. Helping you get more power out of your small engine by reducing engine load
- Made of premium iron material, sturdy and durable but lightweight, great wear-resisting and fast heat dissipation, safe for your car use
- Recommended engine: 2HP-8HP, 3/4" bore designed for 6.5hp 212CC engines, also fit for 196cc engines, only for versions with a bore diameter of 0.75 (19.05mm). Not for versions with a bore diameter of 0.787 (20mm)
10. 212CC 30 Series Torque Converter Go Kart Clutch 3/4" 10T #40 41 420 and 12T #35 Chain for Manco
- Replace Part NumberTorque Converter Kit Replaces Comet 219552A, 203814A, 219456A, 218352A, 218353A, TAV2 30-75. Fit for Comet Torque Converter, desirable in applications requiring extra rugged driving ability such as small vehicles, riding lawnmowers, boonie bikes, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, LTV's, waterski winches, grounds maintenance appliances, materials handling devices and industrial equipment
- 2 SprocketsComes with both sprockets fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain (Chain not included). It will work with engine sizes 2HP-7HP
- Toruqe Converter BeltLength: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"
- Excellent MaterialOur go-kart torque converter is made of high-quality iron and aluminum material, lightweight, sturdy, and durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed
- Full-Set EquipmentKit obtains 1 x 3/4" driver pulley. 1 x 5/8" bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware
Peter
Related Posts
- Best Phone Line Modem Router
- Best Air Freshener For Farts
- Best Gel Nail Polish Top And Base Coat
- Best Heat Shield For Cars
- Best Arimistane
- Best Concealed Carry Gun For Fat Guys
- Best Bathroom Tile Scrubber
- Best Shoes For Top Foot Pain
- Best Black Seed Oil For Health
- Best Whitening Soap For Underarms
- Best Magnum Condoms
- Best Haritaki Powder
- Best Desiccated Liver Supplements
- Best Non Chlorine Shock For Hot Tubs
- Best Paint Stripper For Concrete
- Best Clippers For Big Dogs
- Best Fajas Shapewear
- Best 1911 Night Sights
- Best Cheap Fret Crowning File
- Best Flat Iron Spray For Frizzy Hair