With so many great Best Go Kart Clutch to pick from, like those from brands such as ILONPA,LotFancy,GYMMEDS,TadaMark,IPARTS EXPERT, it can be tricky for customers to decide what to buy. But after extensive research, we’ve discovered the stand-out Best Go Kart Clutch currently on the market.
Our team rigorously tested numerous products available to consumers. The one that stands at the top of our list is ILONPA Best Go Kart Clutch, thanks to its impressive performance and features. Below you’ll find more of our top-rated picks, along with insightful analysis from our seasoned experts. Check out their thoughts before making your purchasing choice. With this guide backing your decision, you’re sure to end up with a Best Go Kart Clutch you’ll love.
Editor's Choice
Centrifugal Clutch, Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain 12.7mm pitch for Mini Bike, Go
Premium Pick
LotFancy Go Kart Clutch 3/4 Bore 12T for #35 Chain, Predator 212 Engine Centrifugal Clutch, with
Budget Pick
GYMMEDS Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain, Centrifugal Clutch fit for Predator
Top 10 Best Go Kart Clutch
We researched and compared the top products in the Best Go Kart Clutch category to provide you with these recommendations.
1. Centrifugal Clutch, Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain 12.7mm pitch for Mini Bike, Go
- Centrifugal Clutch, Go Kart Clutch 3/4 Bore 10T for #40 #41 #420 Chain for Go Kart Minibike MB165 & MB200, Up to 6.5HP, 1pc Connecting Link Included. Please note: the fixed pitch of #40 #41 #420 chain is 12.7mm(0.5 inch)
- Perfect for Go Kart Minibike Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior
- Works with 2 - 6.5hp Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200. Briggs Stratton and 2-6.5 HP with 3/4" Shaft and 3/16 key way. Tecumseh Engines 2-6.5 HP with 3/4" Shaft and 3/16 key way. Engagement Speed: 2300300 RPM
- Tooth: 10 Tooth sprocket for #40/41/420 chain, However, the chain in our set is #420, the roller diameter and inner wall width of #420 chain and #40 or #41 chain are not the same, so please confirm the chain model you need before placing an order
- Package included: 1 x Centrifugal Clutch, 1 x #420 Chain(96 links, 48 inches) and 1 x Connecting Link
- Installation Suggestions: Before installation: you need to drip a circle of lubricant above the circlip and wait for it to seep in, then rotate the clutch and turn it without any obstruction. After installation: when it is just mounted and start to run, you need to break it in 3-5 times to make the Clutch Shoes get enough friction. No-load operation until the clutch first engagement to keep 10s and then turn off the engine to cool down, after that load repeat the above operation 3 times, speed from 0 to extreme speed, each interval of two minutes to cool down. After that it is ready for normal use
2. LotFancy Go Kart Clutch 3/4 Bore 12T for #35 Chain, Predator 212 Engine Centrifugal Clutch, with
- Centrifugal Clutch 3/4 Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 RPM
- Our go-kart clutch is made of high-grade steel, heavy-duty and long lasting. It can withstand the strain and heat caused by friction, once the clutch engages
- Perfect for Go Kart, Minibike and Fun Kart. Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4 shaft
- Also fits any other engines with 3/4 crank shaft and 3/16 key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands
- Go cart clutch kit includes 1 x 3/4 12 Teeth Clutch, 2 x Chain Connecting Links, 1 x Clutch Bolt and Washer Kit, 1 x Screws Set (size: 1/4-28x5/8"), 1 x Allen Wrench. (The chain is not included. )Saves You the hassle of having to hunt down all the right parts at your local hardware store
3. GYMMEDS Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain, Centrifugal Clutch fit for Predator
- 10 Tooth Centrifugal ClutchThis go kart clutch 3/4" Bore 10T for #40/41/420 Chain, with 3/4" Bar Shaft and 3/16" Key, WayDesigned for Single Wheel Drive Karts with Tires no larger than 15" Tall Chain Not included).Widely applicable to Go Kart, minibike, generator, garden tractors, scooterx, sport kart, mini chopper, and mini motorcycles engines.
- CompatibleThe centrifugal clutch fit for 212cc Predator Engines (engine with 3/4 crank shaft and 3/16" key way) 2-6.5hp Honda and Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200 Briggs and Stratton and 2-6.5 HP with 3/4 Shaft Tecumseh EnginesAlso fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 2-6.5HP motors in all brands.
- Easy to InstallThe Go kart clutch is easy to install, Bolt and washer kit are included. mounts onto crankshaft using bolt and washer on the end of the crankshaft.
- Package IncludePlease check the TYPE and crankshaft size before purchasing. Package Includes 1 x 3/4" Bore 10 Tooth Clutch, 1 x Clutch Bolt, 1 x Washer Kit, 1 x Wrench.You can get the most friendly customer service.
- Product MaterialThe Go kart clutch is made of super grade high impact/wear resistant steel, which is lightweight, portable,maximum torque, wear-resisting and fast heat dissipation.
4. Go Kart Clutch for 2-6.5HP Engine 3/4" Bore 12T #35 Chain Centrifugal Clutch Fit For Predator
- Fit for 3/4"(19.05mm) Bore 12 Tooth Centrifugal Clutch for 4 Feet 35 Chain Common clutch for 2-6.5 HP engines Engagement Speed 2300300 PRM.The product fits for 19.05mm,not for 20mm!The chain fixed pitch is 9.525mm.
- Fit for 2 - 6.5hp Honda Engines GC160, GC190, GX120, GX140, GX160, GX200. Fit Tecumseh Engines 2-6.5 HP with 3/4" Shaft. For Briggs Stratton and 2-6.5 HP with 3/4" Shaft. For Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc.
- Perfect for Go Kart, Minibike and Fun Kart;It also fit for any other engines with 3/4 crank shaft and 3/16 key way, most 5.5 HP clones, 6.5 HP clones and 4-6.5HP motors in all brands.Package Included: 1 x Centrifugal Clutch + 1 x 4 Feet #35 Chain(130 Links) + 1 x Connecting Link + 2 x Set Screws
- Attention should be paid during the first use after installation: perform 3-5 break ins. If the speed is not enough, the clutch internal swing block (clutch shoes) will slip and smoke due to insufficient contact area caused by friction.(Please refer to the product details for the operation process)
- Satisfaction Service: 1 YEAR SATISFACTORY WARRANTY. NoteIf the chain is too long, you could shorten it to a suitable length by yourself
5. GYMMEDS Go Kart Clutch 3/4" Bore 10 Tooth with #40/41/420 Chain, Centrifugal Clutch for Predator
- 10 Tooth Centrifugal ClutchThis go kart clutch 3/4" Bore 10T and #40/41/420 Chain, WayDesigned for Single Wheel Drive Karts with Tires no larger than 15" Tall.Widely applicable to Go Kart, minibike, generator, garden tractors, scooterx, sport kart, mini chopper, and mini motorcycles engines.
- CompatibleThe centrifugal clutch fit for 212cc Predator Engines 2-6.5hp Honda and Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200 Briggs and Stratton and 2-6.5 HP with 3/4 Shaft Tecumseh EnginesAlso fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 2-6.5HP motors in all brands.
- Product Material The Go kart clutch is made of super grade high impact/wear resistant steel, which is lightweight, portable,maximum torque, wear-resisting and fast heat dissipation.
- Easy to Install The Go kart clutch is easy to install, Bolt and washer kit are included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft.
- Package IncludePlease check the TYPE and crankshaft size before purchasing. Package Includes 1 x 3/4" Bore 10 Tooth Clutch, 1 x #40/41/420 Chain, 1 x Clutch Bolt, 1 x Washer Kit, 1 x Wrench.You can get the most friendly customer service.
6. 212CC Torque Converter 6.5 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain
- TORQUE CONVERTER DIY MODIFICATIONS COMPATIBLEDIY Modifications fits for go karts and mini bikes and drift carts, such as BT200X, cx100, ct200u ex, Massimo Baja 200, doodlebug db30, mini-bike, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. Note This is not made by Comet, just the modification replacements for it. Cars mentioned above not included in package.
- REALLY WAKES UP THE BIKE This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. DIY modifications to your Mini Bike require some mechanical ability. I'm sure you can do it!
- BRING YOUR OFF-ROAD MACHINE TO LIFEThis TAV2 30 Series Go Kart Clutch Kit fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design.
- A HUGE IMPROVEMENT OVER THE OLD CENTRIFUGAL CLUTCHThis clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. On a lighter buggy or drift cart or mini-bike this will SMOKE your old centrifugal clutch.
- 30 SERIES TORUQE CONVERTER BELT FOR 6" DRIVEN Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".
- FOR YOUR CONVENIENCE THIS KIT COMES WITH1 x 3/4" Driver Pulley;1 x 5/8" Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware.
7. Go Kart Clutch 3/4" Bore 10T with #40 41 420 Chain for Go Kart Minibike Yerf-Dog karts with Tecumseh
- General Fitment: This go kart clutch and chain fit for Go Kart Minibike Yerf-Dog karts with Tecumseh
- Fitment: Fit for 2- 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200. And for Briggs Stratton and 2-6.5 HP with 3/4" Shaft. Tecumseh Engines 2-6.5 HP with 3/4" Shaft
- Product Detail: 3/4" Bore 10T Sprocket with 40/41/420 Chain designed for 2-7Hp 212cc Predator engines clutch performance parts
- Attention: 3 /4-inch centrifugal clutch for single wheel belt direct drive karts with tires No Larger Than 15" tall
- Before Purchasing: Please check carefully up and below information about our go cart clutch 3/4 shaft fitment before your purchasing, any question, please contact us first, thank you!
8. FDJ Centrifugal Clutch 3/4 10 Tooth 212cc Predator Engine Go Kart Clutch with Bolt and Washer Kit
- 212cc Predator Centrifugal Clutch 3/4" Bore 10 Tooth for 40,41,420 Chain
- Heavy Duty Mini Bike Clutch 3 4 inch 10 Tooth Go Cart Clutch. Built in Keyway 3/16" Predator Belt Drive Clutch
- Bolt and Washer are Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft.
- Perfect for Go Kart Minibike Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior
- Compatible with 2-6.5hp Honda and Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200 Briggs and Stratton and 2-6.5 HP with 3/4 Shaft Tecumseh Engines
9. LotFancy Go Kart Clutch 3/4 Bore 10T for #40 41 420 Chain, Predator 212 Centrifugal Clutch, Up to
- Centrifugal Clutch 3/4" bore for 212cc Predator Engines, 10 Tooth for 40,41,420 chain, Up to7HP engines. Common clutch for 2-7hp engines 2300 RPM
- Perfect for Go Kart Minibike Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior
- Compatible with 2-6.5hp Honda and Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200 Briggs and Stratton and 2-6.5 HP with 3/4 Shaft Tecumseh Engines
- Mounts onto crankshaft using bolt and washer on the end of the crankshaft
- Set screws and chain NOT included. Suitable for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall
10. FDJ Minibike Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain
- Heavy Duty 10T Sprocket for 40/41/420 Chain 212cc Predator Belt Drive Centrifugal Clutch
- 3/4" Bore Designed for 2-7Hp 212 Predator Engines Clutch Performance Parts
- 3 4 inch Centrifical Clutch for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall
- Fits 2 - 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200
- Fits Go Cart Motor Auto Engine Tecumseh Clutch 6.5 Horsepower Motor with 3/4" Bar Shaft and 3/16" Key Way
Peter
Related Posts
- Best Shoes To Wear With Sprained Ankle
- Best Nutrients For Coco
- Best Long Lasting Air Freshener For Car
- Best Indoor Irrigation System
- Best Cushion For Sciatica While Driving
- Best Smelling Old Spice Body Spray
- Best Retainer Cleaners
- Best Ereader For Kids
- Best Back Traction Device
- Best Grow Tent Kits
- Best Walking Canes For Stability
- Best Weed And Feed For Bermuda
- Best Soap For Seborrheic Dermatitis On Face
- Best 3d Printer Under 5000
- Best Gochujang
- Best Budget Watercolor Brushes
- Best Coffee Protein Powder
- Best Deer Attractant Spray
- Best Scroll Frame For Cross Stitch
- Best Dash Cam For Hot Weather