You will find our hand-picked selection of Best Wheel Spacers For Tacoma below. You have a wide variety of choices of brands such as KSP PERFORMANCE,FLYCLE,EZISOE available to you as a result of the fact that each one of them has a unique pricing, look, and feel. Continue reading for an in-depth analysis in our Best Wheel Spacers For Tacoma buying guide!
Our experts tested a variety of Best Wheel Spacers For Tacoma on the market. Right at the top of the list is KSP PERFORMANCE Best Wheel Spacers For Tacoma. Check out some more of our favorites below, and read some valuable insight from our experienced editors.
Editor's Choice
KSP 6X5.5 Wheel Spacers Fit for Tacoma 4runner, 1.5 inches Forged Hub Centric Adapters Kits with
Premium Pick
KSP 1.25" Wheel Spacers for Tacoma 6 Lug Wheel,4pcs 6x5.5 Hubcentric Spacer fit for 4runner Tundra
Budget Pick
6X5.5 Wheel Spacers, KSP Forged 1"(25mm) 6x139.7mm to 6x139.7mm Thread Pitch M12x1.5 Hub Bore 108mm
Top 10 Best Wheel Spacers For Tacoma
We researched and compared the top products in the Best Wheel Spacers For Tacoma category to provide you with these recommendations.
1. KSP 6X5.5 Wheel Spacers Fit for Tacoma 4runner, 1.5 inches Forged Hub Centric Adapters Kits with
- Attention!!!For safer driving,if the length of your original bolt is less than 27mm, please change the original nut to Extended(ET) lug nut.B07DLX519Nespecially for Tacoma and FJ. And please verify your vehicle compatibility in Product Description BEFORE purchasing or Contact customer service. Equipped with Thread Locker for fastening.
- Specification6x5.5 to 6x5.5 (6x139.7 mm to 6x139.7mm), Wheel and Vehicle PCD(Bolts Pattern) must be same, Hub Bore: 106mm, Spacer Thickness1.5"(38mm), Stud/Nut Thread Pitch: M12x1.5, Quantity: 4 Pcs. Recommended torque: 72-80 FT/LBS
- CompatibilityFit for 1996-2022 4 Runner, 2007-2022 FJ Cruiser, 2005-2019 Fortuner,, 2001-2007 Sequoia, 2002-2022 Tacoma 4WD/Pre-Runner/VVT-i (not fit 2WD S-Runner or X-Runner), 2000-2006 Tundra, 2004-2019 Ventury, 2002-2019 Lexus GX460 470 400 J120 J150 Series. Noted: If your vehicle have locking hub, the spacer can not fit.
- Hubcentric DesignWheel-Centric Lip will fit perfectly over your hub without vibration. Real Forged 6061 T6 Billet Aluminum( AIRCRAFT) with heat-treated and hardened 10.9 grade geomet bolts, fit more Aggressive driving but stronger and lighter than other casting or universal billet.The anodized surface provides additional resistance to corrosion.
- KSP SupportWe offer30-DAY REFUND, 12-MONTH FREE REPLACEMENT PARTS service. If you have any question, please feel free contact us.
2. KSP 1.25" Wheel Spacers for Tacoma 6 Lug Wheel,4pcs 6x5.5 Hubcentric Spacer fit for 4runner Tundra
- Quality and Safety AssuranceThe KSP 6x139.7 wheel spacers are REAL FORGED from Lightweight Anodized Black 6061-T6 Aluminum, is more heavy duty, durable and corrosion resistance. And they are specifically designed by in-house engineers and CNC machined to exact standards,ensuring the best fitment possible. Heat treated and hardened 10.9 grade geomet bolts, not easy to break off and strip. Be carefully measuring the OEM wheel hubs and bore dimensions, these 106mm hubcentirc spacers mount with minimal clearance to prevent any vibration, retaining the stock driving.
- ImproveThere may be not enough threads for the lug nuts to fit wheel spacers, especially for Tacoma and FJ. If he open lug nuts that came with the package can not engaged enough thread, please choose the ET lug nuts (B07DLX519N). Equipped with Thread Locker for fastening.
- Specs4PCS 1.25" (32mm) Thickness | 6x5.5 Vehicle Bolt Pattern | 6x5.5 Wheel bolt pattern | 106mm Center Bore with lip | 12-1.5mm Threaded Studs/Nuts. Recommended torque: 72-80 FT/LBS. We laser engrave the sizing and part number info for an easy identification and individuation. NOTE: The spacer will not fit the front wheels with locking hub, such as some years Land Cruiser, Pickup etc.
- Aggressive LookThe 32mm adapters are designed to move the wheel further out from the hub,fixes clearance issues, wheel hitting the brake calipers or shock/struts,fixes wheels that look tucked in the fenders, gives your car an aggressive stance.
- Sincere ServiceThe items include 4pcs wheel spacers,24 super strong 12.9 grade open ended lug nuts and pro instruction manual. We are off-road and track racing enthusiasts and we have testd and used our own products before selling them, so if you have any question, please feel free contact us and we will reply within 24h.
3. 6X5.5 Wheel Spacers, KSP Forged 1"(25mm) 6x139.7mm to 6x139.7mm Thread Pitch M12x1.5 Hub Bore 108mm
- Universal Fitment: 1989-2023 4Runner, 2007-2023 FJ Cruiser, 2005-2015(6 Lug Vehicles ONLY)Tacoma, 2016-2024 Tacoma, 2000-2006 Tundra, 1980-1997 Land Cruiser, 2014-2019 GX400, 2009-2023 GX460, 2002-2009 GX470, 2004-2012 Canyon(More details see description
- Specification: Bolt Pattern:6x5.5" (6x139.7mm), Hub Bore(without lip hub): 108mm, Spacer Thickness: 1"(25mm), Stud/Nut Thread Pitch: M12x1.5. Recommended torque: 72-80 FT/LBS
- Build Quality: Made of 6061-T6 aircraft-grade aluminum billet, with 10.9 grade geomet bolts, not easy to break/crack or rustproof. No hub lip is to better fit the car with hub lock. Notice: Improper installation will lead to vibration easily. Equipped with Thread Locker for fastening.
- Aggressive Driving Experience: Installing the 1" wheel spacers will make your vehicle look much tougher, quite more stable and allow installation of lift/lowering kits and larger traction tires
- KSP Support:: We offer "30-day refund, 12-momth free replacement" service. If you have any question, pleast feel free contact us firstly
- Before purchasing these wheel spacers: Please Double-check your vehicles make, year, and model against the product description/pictures to confirm compatibility. Please Measure your required size accurately to avoid ordering the wrong fit.
4. 6x5.5 Hubcentric Wheel Spacers 2 inch for 1995-2023 Tacoma 1989-2024 4Runner, 6x139.7mm Wheel Spacer
- Wheel Spacer Parameter--- 2 inch (50.8mm) Thickness | 6x5.5" (6x139.7mm) Vehicle Bolt Pattern | 6x5.5" (6x139.7mm) Wheel Bolt Pattern | 106mm Center Bore | Hubcentric | M12x1.5 Thread Pitch | Recommended torque70-80 LBS
- Note !!!--- For some models such as Tacoma, due to the Vehicle's original bolt length is too short, after installing the wheel spacer, the original lug nuts may not have enough threads to tighten, If this happens, please select to buy our ET nuts (B081NCD3ZM).
- Wheel Spacer Compatibility--- Compatible with 1995-2023 Tacoma, 1989-2024 4Runner, 2000-2006 Tundra, 2007-2023 FJ Cruiser, 2004-2019 Ventury, 2001-2007 Sequoia, 2005-2024 Fortuner, 2003-2009 GX470, 2010-2023 GX460, 1989-2009 HILUX SURF, 1979-2020 HILUX 4WD, 2015-2020 HILUX REVO.
- Superior Processing---CNC processing allows the wheel spacer contact tightly with your hub to ensure Best Fit, Security, Exclusive 12.9 grade screws heat-treated and hardened to ensure No Breakage, Peeling and No Noise or Vibration in high-speed driving, Forged 6061-T6 aluminium alloy material is to ensure Greater Corrosion Resistance and Durability.
- Why Install Wheel Spacers --- These wheel spacears can increase tire clearance, fix brake clamp clearance problems, allow the installation of wider and larger tires and provide your vehicle with a more aggressive stance and appearance.
5. 2'' 6x5.5 Wheel Spacers for Tacoma 4Runner FJ Cruiser Sequoia, 6Lug 6x139.7mm Forged Wheel Spacers
- 6x5.5 Wheel Spacrs Spec: 4 PCS 2 inch Thickness per spacer, 6x5.5 Bolt Pattern, Hub Bore: 108 mm, 12x1.5 Extended(ET) Shank Lug nuts. Because of the problem of Amazon unpacking, if you only receive 2pcs, please contact us and we will reissue one set for you
- 6x5.5 Wheel Spacer Fitment: compatible with 1995-2023 Tacoma(Only 6 Lug vehicle),2016-2023 Tacoma,1989-2024 4Runner,2007-2023 FJ Cruiser,1980-1997 Land Cruiser,2000-2006 Tundra,2005-2024 Fortuner,2001-2007 Sequoia,2002-2024 GX460 GX470,2004-2012 Colorado,2004-2012 Canyon,1993-1998 T100,1994-2002 Passport, 2005-2010 H3
- Benefit of Extended(ET) Lug Nuts: Come with 24 pcs ET Style Lug Nuts, These lug nuts have the same 60 conical seat plus a small 0.300" long shank that will fit into most Toyota wheels or Aftermarket. This equates to about 6 additional full turns of thread engagement, which will usually allow for safe installation of the wheels
- Benefit of wheel spacers: Imporve Better Handling and Increases the Traction,Solves the Adjustment Problems, Fixes Incorrect Offset and Give you the Aggressive Outlook
- WHAT YOU CAN GET: 4pcs 6x5.5 wheel spacers, 2pcs high strength thread-locker (red), 1x user manual.
6. FLYCLE 6x5.5 Hubcentric Wheel Spacers 1 Inch for 1995-2023 Tacoma 4Runner, 6x139.7mm with 12x1.5
- Wheel Spacer Parameter--- 1 inch (25.4mm) Thickness | 6x5.5" (6x139.7mm) Vehicle Bolt Pattern | 6x5.5" (6x139.7mm) Wheel Bolt Pattern | 106mm Center Bore | Hubcentric | M12x1.5 Thread Pitch | Recommended torque70-80 LBS
- Wheel Spacers Compatibility--- Easy installation for 1995-2023 Tacoma (Not Fit 5x4.5 Tacoma), 1989-2024 4Runner, 2000-2006 Tundra, 2007-2023 FJ Cruiser, 2004-2019 Ventury, 2001-2007 Sequoia, 2005-2024 Fortuner, 2003-2009 GX470, 2010-2021 GX460, 1989-2009 HILUX SURF, 1979-2020 HILUX 4WD, 2015-2020 HILUX REVO.
- Note !!!--- For some models such as Tacoma, due to the Vehicle's original bolt length is too short, after installing the wheel spacer, the original lug nuts may not have enough threads to tighten, If this happens, please select our ET nuts (B081NCD3ZM).
- Superior Processing---CNC processing allows the wheel spacer contact tightly with your hub to ensure Best Fit, Security, Exclusive 12.9 grade screws heat-treated and hardened to ensure No Breakage, Peeling and No Noise or Vibration in high-speed driving, Forged 6061-T6 aluminium alloy material is to ensure Greater Corrosion Resistance and Durability.
- Why Install Wheel Spacers --- These wheel spacears can increase tire clearance, fix brake clamp clearance problems, allow the installation of wider and larger tires and provide your vehicle with a more aggressive stance and appearance.
7. Richeer 1 inch 6x5.5 Hub Centric Wheel Spacers with for Tacoma 4Runner Tundra Fortuner Ventury GX470
- Compatibility: 1995-2023 Tacoma(only fit 6 lug); 1989-2023 4Runner; 2000-2006 Tundra; 2007-2023 FJ Cruiser; 2004-2019 Ventury; 2001-2007 Sequoia; 2005-2023 Fortuner; 2002-2023 GX460 GX470.Recommended torque:70-80 FT/LBS
- Specification: 4PCS 1'' Thickness; 6x5.5 (6x139.7 mm) Vehicle Bolt Pattern; 6x5.5" (6x139.7 mm) Wheel Bolt Pattern; 106 mm Center Bore; 12x1.5 Threaded Studs
- High Tensile Strength: The Grade 12.9 stud can reach a tensile strength of 1000MPa, which has higher tensile strength and yield strength than the 10.9 stud, providing better structural support and safety
- Superior Performance: The wheels are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions
- Benefit: The wheel spacers provide extra width for the wheel track to bring an aggressive appearance, and with the improvement of traction, the vehicle's anti-roll performance and handling comfort have been greatly improved
8. 6x5.5 Hubcentric Wheel Spacers for 1995-2023 Tacoma 1989-2024 4Runner with ET Lug Nuts, 1.5 inch
- Wheel Spacer Parameter--- 1.5 inch Thickness | 6x5.5" (6x139.7mm) Vehicle Bolt Pattern | 6x5.5" (6x139.7mm) Wheel Bolt Pattern | 106mm Center Bore | Hubcentric | M12x1.5 Thread Pitch | Recommended torque70-80 LBS
- ET lug nuts--- Different from the original lug nuts, our wheel spacers with extended 12x1.5 open lug nuts ensure sufficient threads for installation to avoid tire loosen,ensure safety and stability during driving.
- Wheel Spacers Compatibility--- Easy installation for 1995-2023 Tacoma (Not Fit 5x4.5 Tacoma), 1989-2024 4Runner, 2000-2006 Tundra, 2007-2023 FJ Cruiser, 2004-2019 Ventury, 2001-2007 Sequoia, 2005-2024 Fortuner, 2003-2009 GX470, 2010-2021 GX460, 1989-2009 HILUX SURF, 1979-2020 HILUX 4WD, 2015-2020 HILUX REVO.
- Superior Processing---CNC processing allows the wheel spacer contact tightly with your hub to ensure Best Fit, Security, Exclusive 12.9 grade screws heat-treated and hardened to ensure No Breakage, Peeling and No Noise or Vibration in high-speed driving, Forged 6061-T6 aluminium alloy material is to ensure Greater Corrosion Resistance and Durability.
- Warranty and Services--- The package including 4pcs 6x139.7 hubcentric wheel spacers, 2pcs high strength thread-locking and a user manual.our wheel spacers & adapters are covered by 2 years warranty.
- Why Install Wheel Spacers --- These wheel spacears can increase tire clearance, fix brake clamp clearance problems, allow the installation of wider and larger tires and provide your vehicle with a more aggressive stance and appearance.
9. Spidertrax WHS007 Blue Wheel Spacer Kit
- Spidertrax 1.25" thick, 6 on 5.5" bolt-on design for front and rear late model Toyota axles.
- The WHS007 Wheel Spacer Kit is designed specifically for the following Toyota models: 2007-2014 FJ Cruiser, 2001-Present Tacoma 4WD & PreRunner, 2001-2007 Sequoia, 2000-2006 Tundra, 1996-2024 4Runner
- Factory machined pre-installed 4140 wheel studs.
- Anodized 6061T6 domestic grade aluminum alloy.
- Precision wheel and hub centric fit.
10. dynofit 6x5.5 Wheel Spacers 2 Inch Compatible with Toyota Tacoma, 4Runner, FJ Cruiser | M12x1.5
- CompatibilityToyota 1995-2015 Tacoma (6 lug) & 2016-2023 Tacoma, 1989-2023 4Runner, 2007-2023 FJ Cruiser, 1980-1997 Land Cruiser, 2000-2006 Tundra, 2005-2023 Fortuner, 2001-2007 Sequoia, 1993-1998 T100, 1980-1988 Pickup 4WD, 1989-1995 Pickup (6 lug) | Lexus 2002-2023 GX | Chevy 2004-2012 Colorado | GMC 2004-2012 Canyon | Hummer 2005-2010 H3, 2009-2010 H3T | Acura 1995-1999 SLX | Isuzu 1981-2003 Trooper, 1991-2004 Rodeo, 2001-2003 Rodeo Sport, 2005-2008 I-Series, 2002-2004 Axiom | Honda 1994-2002 Passport | Hyundai 2006-2010 Entourage | Mitsu-bishi 1996-2008 Montero Sport
- 6 Lug Wheel Spacer ParameterWheel bolt pattern: 6x5.5"(6x139.7mm), Hub Bore: 108mm, Thickness: 2"(50.8mm), Studs Thread Pitch: 12x1.5, Set of 4 pcs wheel adapters and 24pcs Extended Lug Nuts
- Well MadeDynofit wheel spacers are crafted from lightweight, anodized 6061-T6 aluminum using forged manufacturing methods, offering superior strength compared to casting. They're built tough and won't break. DACROMAT-treated bolts (SGS approved) provide higher hardness and rust resistance, while CNC processing enhances material hardness and corrosion resistance
- New Updates - Exteneded Lug NutsCompared with the open lug nuts for ordinary spacers, we offer the Exteneded Lug Nuts will solve its problem by tighten the spacers more securely and precent loosening which is so improtant for your safety
- Make Room for the TiresThese spacers not only enhance the look of your vehicle by moving the wheels 2 inch further out from the hub, but they also allow for larger tire installations. They solve brake caliper clearance issues, correct tire rubbing problems, and improve cornering stability
- Brand PromiseFor best results, we recommend using some glue on the spacers and getting an alignment after installation. We offer a 2-year warranty and worry-free after-sales service, plus a '30-DAY REFUND'. Please double-check your vehicles compatibility (year/make/model) in the description or pictures before purchasing the spacers
Peter
Related Posts
- Best Lotion For Calluses
- Best Womens Tennis Shoes For Foot Pain
- Best Carpal Tunnel Keyboard
- Best Multi Tool Screwdriver
- Best Silicone For Exterior Windows
- Best Probiotics Consumer Reports
- Best Wheels For Spinner Luggage
- Best Wood For Humidor
- Best Shine Spray For Fine Blonde Hair
- Best Mushroom Products
- Best Silicone Cupping Set
- Best Pellet Stove With Thermostat
- Best Typewriter 2022
- Best Shocks For 2004 Chevy Tahoe
- Best Black Car Wrap
- Best Ultrasonic Cat Repellent Outdoor
- Best Sights For Kimber 1911
- Best Knife And Fork Set
- Best Vascularity Supplement
- Best Wrap For Plantar Fasciitis