Best Water Based Sealer For Pavers

Peter | 19-11-2025

If you aren’t someone who makes frequent purchases, selecting the best Best Water Based Sealer For Pavers won’t be an easy chore for you. However, you shouldn’t be concerned because we have provided you with the most comprehensive list possible of the top Best Water Based Sealer For Pavers. Have a look at the products on our list, and pick the ones that appeal to you the most.

We researched and tested Best Water Based Sealer For Pavers in the market to get you this list. Our most recommended product is MasonryDefender Best Water Based Sealer For Pavers. Check out our picks for all of our favorites, and be sure to read our buying guide to get all the information you need to make the best choice!

Editor's Choice
5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer,
5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer,
Premium Pick
Low Gloss Patio Paver Sealer, 1 gal - Clear Water-Based Sealant for Natural Stone Surfaces
Low Gloss Patio Paver Sealer, 1 gal - Clear Water-Based Sealant for Natural Stone Surfaces
Budget Pick
McKinnon Concrete Sealer, Paver Sealer 5 Gallon, Penetrating High Gloss Wet Look, Outdoor/Indoor,
McKinnon Concrete Sealer, Paver Sealer 5 Gallon, Penetrating High Gloss Wet Look, Outdoor/Indoor,

Top 10 Best Water Based Sealer For Pavers

We researched and compared the top products in the Best Water Based Sealer For Pavers category to provide you with these recommendations.

1. Low Gloss Patio Paver Sealer, 1 gal - Clear Water-Based Sealant for Natural Stone Surfaces

Low Gloss Patio Paver Sealer, 1 gal - Clear Water-Based Sealant for Natural Stone Surfaces
9.5

Masonrydefender

Check Price On Amazon
  • Invisible Waterproofing Protection - Milky white in appearance when first applied, and dries clear
  • Non-Yellowing, Clear, Water-Based, VOC Compliant Acrylic Sealer - Low Odor and Easy Cleanup with Soap & Water
  • Helps Prevent Color Loss on Patio Stone Pavers
  • Ready to Use - No Mixing Required - Easy to Apply with a Pump Up Sprayer
  • Provides a Low-Gloss Finish to Patio Paver Stones (Does not leave a high gloss finish on your paver stones but rather, a rich angular sheen that protects your pavers from fading and hardens, or stabilizes the joint sand. The amount of sheen will vary, based on the porosity of the pavers).

2. 5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer,

5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer,
9.8

Foundation Armor

Check Price On Amazon
  • Water based, breathable, high solids Silane Siloxane sealer that can be used on interior and exterior, vertical and horizontal concrete, brick, and pavers.
  • Approved by the DOT as a water repellent sealer and can provide up to 10 years of performance.
  • Will maintain the natural, unsealed look and feel of the substrate.
  • Will reduce damage caused by snow and ice, road salts, mold and mildew, and staining.

3. MasonryDefender Low Gloss Patio Paver Sealer - Clear Water-Based Sealant for Patio Pavers & Natural

MasonryDefender Low Gloss Patio Paver Sealer - Clear Water-Based Sealant for Patio Pavers & Natural
8.7

Masonrydefender

Check Price On Amazon
  • CLEAR WATERPROOF SEALER: This water based acrylic sealer goes on milky white and dries clear, providing a rich, low-gloss sheen that enhances and protects your surfaces from fading; it is VOC-compliant and prevents color loss without yellowing
  • JOINT SEALING AND SAND LOCK: Our paver patio sealer seals joints by hardening and stabilizing the joint sand, helping to prevent weed growth and ant colonization
  • USE ON THESE SURFACES: This product is perfect for clay brick, clay paver stones, cement paver stones and natural stone and can be used on most types of horizontal, above grade concrete applications
  • COVERAGE: Covers 75-150 sq ft per gallon; no mixing required, simply use a pump-up sprayer to apply to stone surfaces and then back brush for even application; allow it to dry and then apply second coat, dry time will normally take 1-2 hours
  • EASY TO CLEAN: This paver sealant delivers a subtle, low gloss finish with low odor, and it's easy to clean up with soap and water

4. Armor SX5000 WB Water-Based Silane-Siloxane Sealer for Concrete, Brick, Pavers, Stone - Matte

Armor SX5000 WB Water-Based Silane-Siloxane Sealer for Concrete, Brick, Pavers, Stone - Matte
8.5

Foundation Armor

Check Price On Amazon
  • PROFESSIONAL GRADE SILANE SILOXANE SEALER: The Armor SX5000 WB is a professional-grade water-based silane siloxane sealer designed for use on unsealed concrete, brick, paver, bluestone, flagstone, slate, natural stone, and masonry.
  • REDUCES WATER ABSROPTION BY UP TO 95%: The Armor SX5000 WB chemically reacts to form a water-repellent barrier below the surface that will reduce the absorption of water and other liquids by up to 95%.
  • WONT CHANGE THE LOOK OR COLOR: Formulated with high-quality US-manufactured resins, the Armor SX5000 WB is designed to protect concrete, brick, pavers, stone, and masonry without changing the look, color, or feel. The substrate will look and feel exactly as it did before it was sealed!
  • LONG LASTING PROTECTION: The Armor SX5000 WB Silane-Siloxane concrete sealer chemically reacts to form a water-repellent barrier below the surface that can last for up to 7-10 years. By reducing the absorption of water through the surface, damage caused by water absorption is also reduced. Sealed surfaces are more resistant to cracking, spalling, ice damage, salt damage, organic surface growth, and staining.
  • READY TO USE: The Armor SX5000 WB is ready-to-use and can be applied to a properly cleaned and prepped unsealed surface with pump sprayer. One gallon covers up to 175-225 square feet per gallon. Foundation Armor cleaners and sprayers are available separately.
  • EASY TO MAINTAIN: The Armor SX5000 WB works entirely below the surface so there is no surface film or coating to maintain. When it is time to reseal, simply apply 1-2 coats of the Armor SX5000 WB to a clean, dry, and absorbent surface with a pump sprayer.
  • WATER BASED FORMULA: The Armor SX5000 WB is water-based. It is easy to use, 0 VOC, and has no odor. Clean-up is quick and easy, and can be done with soap and water.

5. McKinnon Concrete Sealer, Paver Sealer 5 Gallon, Penetrating High Gloss Wet Look, Outdoor/Indoor,

McKinnon Concrete Sealer, Paver Sealer 5 Gallon, Penetrating High Gloss Wet Look, Outdoor/Indoor,
9.1

Mckinnon Materials

Check Price On Amazon
  • INDUSTRIAL GRADE, PROFESSIONALS CHOICE: Concrete Sealer and Paver Sealer for both Outdoor and Indoor Applications. Our Water-based modified Acrylic is specifically formulated for both unsealed and previously sealed (with a water-based concrete sealer).
  • DURABILITY: Our formula WILL NOT PEEL OR CRACK!
  • VERSATILITY: Our Sealer is PERFECT for use with the widest selection of substrates like Concrete/Cement, Pavers, Stone, Natural Stone, Rock, Limestone, Flagstone, Pool Decks, Brick, and even Stucco!
  • CRYSTAL COAT WEATHER SHIELD: Forget about sealing again for up to 5 years!
  • CRYSTAL CLEAR: Our water-based modified acrylic formula dries absolutely crystal clear within 8 hours!
  • REVIVE: Bring back your old weathered surfaces with our Sealer!

6. Siloxa-Tek 8500 Ready to Use - 1 Gallon Penetrating Concrete Sealer, Water and Salt Repellent.

Siloxa-Tek 8500 Ready to Use - 1 Gallon Penetrating Concrete Sealer, Water and Salt Repellent.
7.7

Ghostshield

Check Price On Amazon
  • Siloxa-Tek 8500 is a water-based, silane/siloxane engineered to reduce water and moisture intrusion. Will not change the aesthetics, leaving your concrete, pavers, brick and stone with its original natural appearance. This low VOC formula is 100% breathable and non film forming (meaning it will never peel flake or delaminate).
  • Siloxa-Tek 8500 is D.O.T (Department of Transportation) approved and resists surface damage caused by chlorides and deicing salts. It mitigates cracking, spalling and pitting and protects against surface degradation from freeze thaw damage.
  • Siloxa-Tek 8500 is a supercharged penetrating sealer with 6x higher actives than any other water based concrete sealer on the market for long lasting protection that actually last. Resists wind driven rain.
  • Siloxa-Tek 8500 is a commercial grade, impregnating sealer for commercial and residential applications. Its high actives formula is UV stable and will not break down from direct sunlight. There is no change to the surface profile ensuring a non slick surface. Siloxa-Tek 8500 is the next generation of impregnating sealers with smaller active particles for even deeper penetration for unrivaled protection.
  • Excellent water beading effect, easy application with sprayer, roller or brush. Use on driveways, garages, basements, patios, pool decks. Covers up to 250 square feet per gallon per coat. If installed by certified applicator vertical applications can last up to 10 years before reapplication is required.

7. Eco Advance Concrete/Masonry Siloxane Waterproofer - 1 Gallon

Eco Advance Concrete/Masonry Siloxane Waterproofer - 1 Gallon
8.9

Eco Advance

Check Price On Amazon
  • Ready to use commercial grade formula can be applied using a standard garden pump sprayer
  • Ideal for use on concrete, brick, stucco, stone (natural and synthetic), EIFS, pavers and more
  • Protects against water damage, oil, stains, mold, mildew, de-icing salts, and pool/spa chemicals
  • Water-based, non-toxic, non-flammable formula does not harm landscape plantings
  • Vapor permeable (breathable) water proofer can be used on new concrete and masonry

8. Armor WB25 Water Based High Gloss Acrylic Concrete Sealer and Cure and Seal - 5 Gallon

Armor WB25 Water Based High Gloss Acrylic Concrete Sealer and Cure and Seal - 5 Gallon
8.3

Foundation Armor

Check Price On Amazon
  • Meets ASTM 1315 and ASTM C 309 standards
  • Protective surface film will reduce damage caused by water absorption and surface abrasion
  • Made from non-recycled US manufactured resins
  • Will enhance concrete and pavers with a high gloss finish
  • Will last for up to 1-3 years before the need for a recoat

9. 5 Gal. DOMINATOR LG+ Clear Acrylic Sealer | Low Gloss Paver Sealer | Wet Look, Color Enhancing |

5 Gal. DOMINATOR LG+ Clear Acrylic Sealer | Low Gloss Paver Sealer | Wet Look, Color Enhancing |
8.7

Dominator

Check Price On Amazon
  • COLD WEATHER WARNING: Do not apply if surface temperature is expected to be below 50 for 48 hours before & after application. ENHANCE the life and beauty of your surface (wet look) and a low gloss finish for 2-4 years before the need to reseal (depending on your environment).
  • Protects against oil stains and other spills while providing the ultimate weather resistance on surfaces including concrete pavers and decorative concrete. Not intended for stone or clay.
  • Great coverage rate: 250-400 square feet per gallon, per coat. You will save money and time by reducing maintenance when you seal with DOMINATOR LG+.
  • Breathe easy with DOMINATOR LG+ concrete sealer's water-based formula. No harsh odors and low VOCs (Volatile Organic Compounds) makes application pleasant and easy.
  • Easy spray on application using our Quick Start guide (included in every purchase) and How To videos. DOMINATOR LG+ has an incredibly fast dry time between coats making it an easy one-day project, unlike some competitors.

10. 1 GAL. Armor WB25 Water Based High Gloss Acrylic Cure and Seal for New & Existing Concrete Surfaces

1 GAL. Armor WB25 Water Based High Gloss Acrylic Cure and Seal for New & Existing Concrete Surfaces
7.7

Foundation Armor

Check Price On Amazon
  • PROFESSIONAL GRADE CONCRETE SEALER & PAVER SEALER: The Armor WB25 is designed for use on unsealed concrete and pavers, and concrete and pavers previously sealed with a water-based acrylic concrete sealer.
  • HELPS AID IN PROPER CURING: The Armor WB25 doubles as a cure and seal. When applied to new concrete it can help aid with proper curing. The Armor WB25 meets ASTM C-1315 and C-309 standards.
  • ATTRACTIVE HIGH GLOSS FINISH: Formulated with high-quality US-manufactured resins, the Armor WB25 is designed to enhance concrete and paver surfaces with a high gloss finish. If you like what your concrete or pavers look like but want a high gloss finish, the Armor WB25 is perfect for your application.
  • LONG LASTING PROTECTION: The Armor WB25 will provide a durable, long-lasting, non-yellowing, professional-grade high gloss finish designed to last for up to 1-3 years in commercial and residential applications. It helps to protect concrete and pavers against damage caused by surface abrasion, foot and vehicle traffic, road salts, UV rays, water absorption, snow and ice, exposure to the elements, and more!
  • READY TO USE: The Armor WB25 can be applied to a properly cleaned and prepped surface with a roller or sprayer. One gallon covers up to 175-225 ft2/gallon.
  • WATER-BASED, LOW ODOR, LOW VOC: The Armor WB25 is low VOC and low odor, making it a preferred concrete sealer for interior and exterior concrete and paver applications.
  • VERSATILE: The Armor WB25 can be used on a variety of concrete surfaces including poured concrete, broom finished concrete, stamped concrete, and concrete pavers. Common applications include driveways, walkways, patios, sidewalks, curbing, walls, and more!
  • FORMULATED FOR ALL 50 STATES: The Armor WB25 is low VOC and can be shipped to all 50 states!

Peter

Related Posts