If you aren’t someone who makes frequent purchases, selecting the best Best Straight Edge Cutting Guide won’t be an easy chore for you. However, you shouldn’t be concerned because we have provided you with the most comprehensive list possible of the top Best Straight Edge Cutting Guide. Have a look at the products on our list, and pick the ones that appeal to you the most.
We researched and tested Best Straight Edge Cutting Guide in the market to get you this list. Our most recommended product is KREG Best Straight Edge Cutting Guide. Check out our picks for all of our favorites, and be sure to read our buying guide to get all the information you need to make the best choice!
Premium Pick
ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)
Top 10 Best Straight Edge Cutting Guide
We researched and compared the top products in the Best Straight Edge Cutting Guide category to provide you with these recommendations.
1. Kreg KMA4700-E Straight Edge Guide XL-8 Ft
- Premium Cutting Tools: Turn most circular saws, jig saws, or trim routers into precision, edge-guided tools
- Handy Woodworking Tools: The saw guide is compatible with any right- or left-handed circular saw
- Home Improvement Tools: Cutline indicator positions cuts while the guide rail helps you cut precise lines
- Secure Workshop Accessories: The anti-slip clamp secures portable saw guide; works with materials up to 8 feet
- Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
2. ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dados and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50 straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
3. Swanson Tool CG100 Cutting Guide 100-Inch
- Includes two 50 in. cutting guides; joiner bar allows expansion to 100 in.
- Low-profile design guides any circular saw, sabre saw, router, or utility knife
- Made of durable, high-grade anodized aluminum
- Includes C-clamps to easily attach to your work surface for stability when cutting
- Break-down design makes for easy storage
- A terrific value, backed by 1-year limited
4. BORA 100" NGX Clamp Edge, Straight Cut Guide for Circular Saws, Includes 50-Inch Clamp Edge &
- Clamping end moves with handle for easy adjustability from one side
- Locking handle grabs work surfaces for a secure grip that wont budge
- Made of heavy-gauge, rigid aluminum for extreme durability
- Use with circular saws, routers, Jig saws, and other portable power tools
- Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors
5. Bora NGX 6-Piece Premier Set, Straight Cutting Saw Guide Accessories for Circular Saw, 544600K
- Includes: 50-inch NGX clamp edge, 50-inch NGX Extension with connectors, Saw Plate, 2 rolls of non-chip strip, 2 Track Clamps, T-Square Accessory
- Clamping end on straight edge moves with handle for easy adjustability from one side
- Locking handle grabs work surfaces for secure grip that wont budge
- Includes 50 Clamp Edge and 50 extension for 100 cutting capacity
- Made of heavy-gauge, rigid aluminum for extreme durability
6. Bora QuickCut Circular Saw Guide with Rail & Angle Assist; All-In-One Woodworking Tool, 530416
- One tool, countless uses: the Bora QuickCut does the work of multiple tools, All with one useful saw guide. The multiple angles on this circular saw accessory eliminate the need for a miter saw or more complex jigs. Cut wood or soft metals with unrivaled precision at four preset angles: 22.5, 45, 60, and 90.
- Mark, measure, and cut with ease: save yourself the calculations of a typical tri-square with boras advanced cut guide. Measure perfectly flush angles for framing and crown molding, without doing the math. The ruler also features imperial and metric measurements.
- Easy grip: The large, curved handle provides extra comfort and precision. With the QuickCut, you can get a firm hold on your circular saw without your edge guide slipping.
- Durable: Boras QuickCut saw guide is made with strong aluminum extrusion and conveniently placed ruler marks. It's 16 inches long, with a 14-inch (35.5cm) guide rail for making long, straight cuts.
- Bora Quality: Bora tool is a leader in innovative power tool accessories that make your jobs and projects run smoothly.
7. Johnson Level & Tool J4900 Aluminum Cutting Guide, 98", Silver, 1 Guide
- CUTTING TOOL: This heavy-duty cutting guide by Johnson makes the ideal cutting accessory to perform a variety of indoor and outdoor tasks in plumbing; carpentry; general construction and woodworking.
- QUALITY CRAFTSMANSHIP: The cutting guide features two rails that are made of heavy-duty extruded aluminum; which adds to its longevity and high performance. The practical design ensures a consistent and accurate straight edge.
- EASY ASSEMBLY: This aluminum cutting guide comes with two C clamps; a connector and a joiner plate that makes it easy and convenient to assemble. You require a minimum setup to install the given pieces together.
- VERSATILE USES: The easy-to-assemble cutting guide works efficiently to rip doors; plywood; timber; drywall and other material. It can alternatively use with routers; jigsaws; utility knives and circular saws.
- PRODUCT DESCRIPTION: This Johnson cutting guide is 98 in. long as it comes with two 49 in. long aluminum rails.
8. BORA 4-piece WTX Deluxe Set, Straight Cut Guide for Circular Saws, Includes 24-Inch & 50-Inch WTX
- Includes 24-inch & 50-inch WTX Clamp Edges, 50" Extension with connectors, Saw Plate
- WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability
- Adjustable channel on saw plate fits a wide variety of straight edges up to 3.5 wide
- Fits right- and left-handed circular saws
- Ruled extrusion allows for easy measurements
- Locking handle grabs work surfaces for a secure edge that won't budge
- **Replacement set for BORA 543400 4-piece set
9. Bora 24" NGX Clamp Edge 544024
- Clamping end moves with handle for easy adjustability from one side
- Locking handle grabs work surfaces for secure grip that wont budge
- 24 inch cutting capacity. Easily increase length with 50 inch extension; Made of heavy-gauge, rigid aluminum for extreme durability
- Use with circular saws, routers, jig saws, and other portable power tools
- Part of entire NGX Clamp Edge System to cut and rip sheets and boards
10. Dremel 678 Circle Cutter and Straight Edge Guide, Rotary Tool Attachment, Fits Dremel Models 4300,
- Makes circles from 3/4 In. -12 In. (1.9-30 cm)
- Precision stamped steel construction for accuracy and durability
- Compatible with Dremel tool models: 100, 200, 3000, 4000, 8220, 8240, 8250 and 8260. Also fits onto Dremel 4300 when used with collet and collet nut.
- Attaches quickly and easily without tools
- Depth adjustment allows easy setting of the correct cutting depth
- Straight Edge Guide allows routing or cutting in a straight line
Peter
Related Posts
- Best Synthetic Wig Care Products
- Best Wet Dog Food Made In Usa
- Best Textured Brick Wallpaper
- Best Toddler Melatonin
- Best Car Freshener For Smokers
- Best Beginner Scooter
- Best Bubble Brand
- Best Wetsuit Pants
- Best Icicle Lights For House
- Best Electric Cultivator
- Best Cream For Flaky Eyelids
- Best Bubble Gun For Adults
- Best Hugger Ceiling Fan Without Light
- Best Brand Of Turkey Burgers
- Best Tree Oil
- Best Monitor For Ipad
- Best Pipe Brands
- Best Bottle For Tongue Tie
- Best Bow Mount Trolling Motor For Jon Boat
- Best Oral Probiotics For Halitosis