Best Micro Servo

Peter | 13-12-2023

You will find our hand-picked selection of Best Micro Servo below. You have a wide variety of choices of brands such as INJORA,Smraza,Deegoo-FPV,AGFRC,Deegoo,BETU available to you as a result of the fact that each one of them has a unique pricing, look, and feel. Continue reading for an in-depth analysis in our Best Micro Servo buying guide!

Our experts tested a variety of Best Micro Servo on the market. Right at the top of the list is INJORA Best Micro Servo. Check out some more of our favorites below, and read some valuable insight from our experienced editors.

Editor's Choice
INJORA 7KG 2065 Digital Servo Waterproof High Voltage Sub-Micro Shift Servo for TRX4 TRX6 SCX10 III
INJORA 7KG 2065 Digital Servo Waterproof High Voltage Sub-Micro Shift Servo for TRX4 TRX6 SCX10 III
Premium Pick
Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable,
Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable,
Budget Pick
4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat
4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat

Top 10 Best Micro Servo

We researched and compared the top products in the Best Micro Servo category to provide you with these recommendations.

1. INJORA 7KG 2065 Digital Servo Waterproof High Voltage Sub-Micro Shift Servo for TRX4 TRX6 SCX10 III

  • Brand GuaranteeThe INJORA 7KG 2065 Digital Micro Servo is an affordable, high-voltage "mighty micro" upgrade. Suit for TRX4 TRX6 SCX10 III 1/10 RC Crawler Car.
  • New UpgradeThis sub-micro servo is an excellent choice for the diff lock servo in the TRX-4 TRX-6 and a dig and shift servo for SCX10 III.
  • High waterproofnessIP66 Waterproof design, maintain good water tightness in wet conditions.
  • Exquisite WorkmanshipStainless steel gears and lower noise provide better stability.
  • NoteIf you want to use it in TRX4M, you need to remove/modify part of the stock servo mount.

2. Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable,

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
  • Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 0.01 sec/60(4.8V ) 0.08 0.01 sec/60(6V). Running angle: 180 degree
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 7 ms
  • Amplifier Type: Analog controller. Operating Voltage: 4.8V6.0V
  • Please Note: The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support

3. 4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat

4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat
9.1

Deegoo-fpv

Check Price On Amazon
  • High quality and high cost performance.
  • Operating speed: 0.1second/ 60degree ( 4.8V no load)
  • Operating voltage: 4.8-6V
  • Small size and light weight.
  • Application: Used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.

4. AGFRC Sub-Micro Servo Motor - Upgrade Metal Case Titanium Gear 4.5kg HV Mini Servo for 1/14 1/18

  • Upgrade version: programmable, 8.4V high voltage application
  • Stall Torque: 3.8 kg-cm (52.77 oz-in) @ 6.0V; 4.5 kg-cm (63 oz-in) @ 8.4V
  • Operating Speed: 0.13sec/60 @ 6.0V; 0.10sec/60 @ 8.4V
  • Operating Voltage: 4.8-8.4V; Size: 22.8*12*29.4mm (0.90 x 0.47 x 1.16 in); Weight: 17g
  • Application: Ideal for 1/14, 1/16 Revo, 1/18, 1/24 Scale Crawler, Airplane, 450 Size Helicopter, Robot etc.

5. MG90S 9g Servo Motor Micro Metal Gear for Robot Car Plane RC Helicopter Arduino

  • MG90S Micro Servo Motor, updated SG90 serve motor.
  • Stall Torque: 2.0kg/cm(4.8V)
  • Operating Speed: 0.11 seconds / 60 degrees (4.8V)
  • Metal Gear with less noise
  • Structural Material: Aluminum metal teeth, coreless motor, double ball bearin

6. BETU SG90 Micro Servos, 2PCS Mini Servo for Robot Helicopter Airplane RC Car Boat and Other Models

  • SG90 Servo: High quality and high cost performance; Small size and light weight
  • Mini Servo Stall Torque 1.6kg/cm; Operating voltage: 3.7V 6V; Temperature range: -30 60; Dead band width: 5sec.
  • SG90 9g micro servo motor for remote control helicopters, micro robot, RC car and boats, electronics DIY based on Ard.uino ,R.aspberry Pi and other models.
  • 2PCS 9g Servo Weight: 9g Size: 23*12*30mm.
  • Great digital mini servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment.

7. REEFS RC 99 Micro Digital Metal Gear Waterproof Servo Black SEHREEFS25 Servos

REEFS RC 99 Micro Digital Metal Gear Waterproof Servo Black SEHREEFS25 Servos
8.3

Reefs Rc

Check Price On Amazon
  • Precision Metal Gears / All CNC Alum. REEFS Case
  • High Torque High Speed Micro Servo
  • WATERPROOF

8. AGFRC Digital High-Torque Micro Wing-Servo - CNC Thin Servo with Dual Ball Bearing & Metal Gear

  • Weight 20g, Size: 23*12*27.5mm (0.90 x 0.47 x 1.08 in)
  • Full CNC aluminium hulls and structure
  • High performance Digital mini servo , High precision metal gears
  • Stall Torque: 6.8 kg-cm (95 oz-in) @ 7.4V, 7.5 kg-cm (104oz-in) @ 8.4V
  • Ideal for 1/24 scale RC monster car, SCX10.3, SCX24, airplane and 450 class helicopter tail and swashplate etc.

9. EMAX EMX-SV-0275 ES08MA II 12g Mini Metal Gear Analog Servo for RC Robotics Plane Wing Car Radio

EMAX EMX-SV-0275 ES08MA II 12g Mini Metal Gear Analog Servo for RC Robotics Plane Wing Car Radio
7.9

Tiny Hawk

Check Price On Amazon
  • Metal Gears
  • Lightweight 12 Grams
  • Durable metal and plastic
  • Perfect for Robotics and RC vehicles

10. ES08MA II RC Servo Micro Metal Gear Servo 12g/ 2.4kg/ Emax Mini servo Axial SXC24 Upgrade Parts High

ES08MA II RC Servo Micro Metal Gear Servo 12g/ 2.4kg/ Emax Mini servo Axial SXC24 Upgrade Parts High
7.7

Beffkkip

Check Price On Amazon
  • [Original Genuine Servo] EMAX 12g Metal Gear Micro Servo, The brand RC servo preferred by numerous players
  • [Scientific material] Lightweight material, only 12g rc servo while having strong torque, ideal for installation in FPV aircraft, boat models, gears are made of metal, higher precision, longer life.
  • [Reliable Performance] Durable and adaptable micro servo, low noise and long service life, compatible JR/Futaba connectors.
  • [Operating Voltage and Operating Speed] Voltage: 4.8V~6.0V Operating speed:0.12sec/60 at 4.8V; 0.10sec/60 at 6V.
  • [Application Scope] This RC motor servo is suitable for helicopter KT, climbing car (such as SCX24), glider, small robot and other models

Peter

Related Posts