Looking for some of the best Best Kicker Motor Bracket? As you may know, there are dozens of brands available in the market such as Marinetech,Haida,Marinebaby,Attwood and some come with vastly different price tags. Let us help you out here – we have handpicked the Best Kicker Motor Bracket for you.
To compile our list, we’ve researched and evaluated a range of the best-selling products on the market. We recommend Marinetech Best Kicker Motor Bracket as our top pick because of its exceptional overall performance. Want to explore more options? Read on! There’s also a buying guide to help you make a wise shopping decision.
Editor's Choice
Panther Marine 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket - 10"
Premium Pick
2 Stroke Outboard Motor Bracket Kicker for Boat up to 20HP, Auxiliary Heavy Duty Marine Motor
Budget Pick
Marinebaby Boat Outboard Motor Bracket, Aluminum Boat Engine Support 20 HP
Top 10 Best Kicker Motor Bracket
We researched and compared the top products in the Best Kicker Motor Bracket category to provide you with these recommendations.
1. Panther Marine 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket - 10"
- Adjust your trolling or auxiliary motor to five vertical running positions for changing water or load conditions
- The anodized aluminum bracket is built to handle the increased weight and torque output of todays four strokes with long or short shafts
- Fit type: Universal
- Handles up to 35 HP, 263 lbs. motors with 10" of travel
2. 2 Stroke Outboard Motor Bracket Kicker for Boat up to 20HP, Auxiliary Heavy Duty Marine Motor
- The whole is made of 304 stainless steel,Base is made of plastic.
- Mounting size:4-7/16"* 5-11/16" , Roller size:8-1/4"*10-3/8", Hp rating: to 20hp.
- Manual lifting required to raise and lower your motor.
- Ideal for sailboats, powerboats, locks and holds motor up or down in two vertical running.
- 1x motor bracket.
3. Marinebaby Boat Outboard Motor Bracket, Aluminum Boat Engine Support 20 HP
- Marinebaby Heavy Duty aluminum Motor Bracket Suitable for 2-stroke Motors 7-1/2 HP to 20 HP,
- Stainless Steel Springs Counter-balance Motor Weight, Solid polypropylene mounting board
- 5-position Locking Height Adjustment From 195mm-320mm
- Broad Size: 8" * 10.2" (205mm*260mm) Mounting Size 5.2 * 9 (132mm*230mm)
- Supper corrosion and strong endurance, fit your motor perfectly
- Package: 1* motor bracket (mouting hardware not included);Requires 8mm screws
4. PANTHER MARINE 55-0028 Fixed-Mount 4-Stroke Outboard Motor Bracket
- Works with two and four-stroke motors up to 35 HP and 263 lbs. maximum weight
- Features a rugged polypropylene mounting board
- Includes stainless steel mounting hardware and safety cable
- Refer to manufacturer recommendations and guidelines to ensure proper installation procedures
5. Attwood Outboard Kicker Motor Steering Kit 11663-7
- Steer your kicker motor with your steering wheel by connecting your primary outboard engine to your kicker motor
- 24" zinc-plated rod is durable
- Cut connector rod to size to customize fit
- Quick disconnect assemblies make attachment and removal a breeze
- Tilt either motor while attached
6. Panther 550012 Outboard Motor Bracket - Aluminum, Up to 12 HP
- Designed for motors up to 12 HP or 82 lbs. of maximum weight
- Travel distance of bracket: 14" with 5 stops
- Spring loaded
- Heavy duty, lightweight aluminum
7. Panther Marine 55-0407AL Lightweight 4-Stroke Bracket - Aluminum
- Designed for 2- and 4-stroke motors up to 15 HP or 132 lbs.Fit Type: Universal Fit
- 10" of travel and 5 vertical running positions let you fine tune the motor height for optimal performance
- Do not use without Panther 55-0415 safety cableincluded
- Meets ABYC Standards
8. Panther MARINE-55-0030 Swim Platform Motor Bracket
- Package Dimensions: 15 L x13 H x14 W (inches)
- Package Weight: 15 pounds
- Country of Origin : United States
- Part Number: 55-0030
9. MJ-1-DP Jack Plate 4'' Setback Small Engine Jack Plate for Outboard Motors Up to 35HP (Wooden
- APPLICATION -- Designed for clamp-on mount outboard motors up to 35 HP. Suitable for skiffs, aluminum boats, and inflatables. This cast aluminum offset type jack plate allows mounting of long shaft motors to shorter shaft transom boats.
- WOODEN BLOCK INCLUDED -- Same as MJ-1-DP Jack Plate, Wooden Block Model # WOOD0002. Jack plate comes with pre-cut and pre-grooved wood block for a perfect fit. Ensure more firm and reliable installation of the motor.
- FUNCTION -- Extends 4" off transom. Small boat that made for short shaft outboard engine equipped with a long shaft engine which results in not optimal performance and handling. This jack plate is designed to firmly attach to the transom and provides a higher mounting position for the engine.
- BENEFITS -- Improves performance and handling of smaller or lighter boats. Allows long shaft motors mount to shorter shaft transom boats. Making the boat drive faster.
- 4" SETBACK -- The jack plate extends 4" off transom. Engine mounting surface is 11-1/2" wide x 10" high, and features 4" Setback and 3" Vertical Offset. The overall width of transom mounting flanges is 17". Max weight capacity: 150 lbs. Max Horsepower: 35 HP.
- EASY INSTALLATION -- Position of the holes on the jack plates are consistent and accurately marked for easy installation. With a simple setup and drill process, you will have your jack plate installed in no time.
- TOP QUALITY -- The jack plate bracket is well manufactured from Cast Aluminum, and the Wooden Mounting Block is quality Marine Grade Transom Block. Parts are built with strict quality control standards and for long lasting usage.
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
10. Vinland Marine Outboard Motor Mount Bracket for 20hp Outboard Motor w/Black PP Base, Kicker Motor
- Material: The outboard motor bracket 304 Stainless Steel, mounting board is made of durable black Polypropylene (PP).
- Positioning: this kicker motor mounting bracket is spring-loaded and has 4 vertical adjustable positions.
- Weight Capacity: Capable of holding engines up to 20 HP and a weigh of up to 115 lbs. Works perfectly as jon boat, bass tracker, or canoe motor mount.
- Alternatives: similar products are jack plates for outboard motor, trolling motor mounting bracket, and panther outboard motor bracket.
- Dimensions: Transom Plate Sized at 8 8-5/8 and motor board Size 8-1/4 x 10-3/8.
Peter
Related Posts
- Best Lobster Cracking Tools
- Best 18 Inch Roller Frame
- Best Shoe Spray For Fungus
- Best Woobie
- Best Automatic Indoor Plant Watering System
- Best Budget Red Dot Sight For Pistol
- Best Xylophone Mallets
- Best Foot Pads For Morton’s Neuroma
- Best Progesterone Cream
- Best Unloader Knee Braces
- Best Cortisol Blocker
- Best Waterproof Tape For Pipes
- Best Automotive Buffing Compound
- Best Furniture Dolly For Stairs
- Best Barcode Scanner For Quickbooks
- Best Dash Cam Made In Usa
- Best Hydro Seed Spray
- Best 12v 22ah Battery
- Best Lion’s Mane Pills
- Best Pepper Ball Gun