With so many great Best 30mm Cantilever Scope Mount to pick from, like those from brands such as Vortex,Monstrum,Leupold, it can be tricky for customers to decide what to buy. But after extensive research, we’ve discovered the stand-out Best 30mm Cantilever Scope Mount currently on the market.
Our team rigorously tested numerous products available to consumers. The one that stands at the top of our list is Vortex Best 30mm Cantilever Scope Mount, thanks to its impressive performance and features. Below you’ll find more of our top-rated picks, along with insightful analysis from our seasoned experts. Check out their thoughts before making your purchasing choice. With this guide backing your decision, you’re sure to end up with a Best 30mm Cantilever Scope Mount you’ll love.
Editor's Choice
Vortex Optics Sport Cantilever Scope Mount (30mm - 1.5" Height)
Premium Pick
Monstrum Deadlock Series Dual Ring Scope Mount | 2 Inch Offset Cantilever | 30 mm Diameter
Budget Pick
Leupold Mark Series Tactical Riflescope Mount, 30mm with a Matte finish
Top 10 Best 30mm Cantilever Scope Mount
We researched and compared the top products in the Best 30mm Cantilever Scope Mount category to provide you with these recommendations.
1. Vortex Optics Sport Cantilever Scope Mount (30mm - 1.5" Height)
- Mount your 30mm scope tube while positionsing the center of the scope tube at a height of 1.50 from the base.
- The 2" offset gets your head position and eye relief dialed, while leaving plenty of real estate available to you.
- Lightweight and durable, the mount weighs just 5.39 ounces and is manufactured from 6061 Aluminum.
- Picatinny rail compatible with torque specs laser engraved on the mount - mounting your scope has never been easier. Type 2 low-glare matte black anodized finish.
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
2. Monstrum Deadlock Series Dual Ring Scope Mount | 2 Inch Offset Cantilever | 30 mm Diameter
- All new rigid unibody design with strategically placed lightening cuts to reduce weight
- A lightweight 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25% lighter than our previous generation Slim Profile Series scope mounts
- Available in 3 different mount configurations allowing for optimum placement of your optic: Inline Rings, 1 Inch Offset Cantilever Rings, and 2 inch Offset Cantilever Rings. Available in 1 inch, 30 mm, and 34 mm diameter configurations.
- Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- All Monstrum products are backed by a lifetime guarantee
3. Leupold Mark Series Tactical Riflescope Mount, 30mm with a Matte finish
- Model #177094 - Mark scope mount in size 30mm in Matte finish
4. Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 30 mm Diameter | Black
- Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
5. Monstrum Deadlock Series Dual Ring Scope Mount | 1 inch Offset Cantilever | 30 mm Diameter
- All new rigid unibody design with strategically placed lightening cuts to reduce weight
- A lightweight 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25% lighter than our previous generation Slim Profile Series scope mounts
- Available in 3 different mount configurations allowing for optimum placement of your optic: Inline Rings, 1 Inch Offset Cantilever Rings, and 2 inch Offset Cantilever Rings. Available in 1 inch, 30 mm, and 34 mm diameter configurations.
- Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- All Monstrum products are backed by a lifetime guarantee
6. Monstrum Hypergrip Cantilever Scope Mount with Quick Release | 30 mm Diameter
- Transform your rifle in an instant! With the Monstrum Hypergrip Series QD Scope Mount, you can quickly swap out your optic to meet the needs of any situation.
- The Hypergrip Cantilever Scope Mount is a dual ring scope mount with a one inch forward offset allowing for flexible placement of your preferred optic.
- Mounts secure to any flat top Picatinny equipped rifle via the Monstrum Hypergrip QD mount system. Fastened by adjustable tension QD levers, with no tools required, and anchored in place by the unique Hypergrip locking mechanism.
- The Monstrum Hypergrip QD Scope Mount is available for 1 inch, 30 mm, and 34 mm diameter rifle scope tubes.
- All Monstrum products are backed by a lifetime guarantee
7. CVLIFE Cantilever Scope Mount, 30mm Scope Mounts Offset Dual Ring One-Piece Scope Mount, Lightweight
- 30mm Scope Mount: CVLIFE 30mm scope mount is suitable for scopes with a diameter of 30mm, the spacing between the rings is 2.36", and the center to base height is 1.57".
- Adapted to Picatinny Rail: Our scope mount has 4 recoil lugs at the bottom, which can be integrated with your top rail, zero wobble, more solidly mounted where you place it, and keep zero consistently under impact.
- Offset Cantilever Mount: The scope mount features a 2.4" forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use.
- Torx Screws: Strong torx screws allow for precise tightening and reduce stripping. Comes with spare 4 torx screws, which can be replaced at any time, increasing durability and service life.
- Lightweight Material: This offset dual ring scope mount is made of 6061 aviation aluminum material and weighs only 5 oz, which doesnt add much extra weight to you.
8. Vortex Optics Sport Cantilever 30mm Mount - 2-Inch Offset
- Use this cantilever mount for mounting 30 mm telescopic sights.
- The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.
- The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.
- Aluminum construction
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
9. Burris Optics P.E.P.R. Scope Mount, Includes Both Smooth and Picatinny Ring Tops, 30mm, Standard
- PREMIER CHOICE - The Burris AR-P.E.P.R. Scope Mount is a perfect choice for shooters seeking an unparalleled combination of solidity and durability in a cantilever mount; It ensures exceptional performance and reliability in various shooting scenarios
- INNOVATIVE DESIGN - This mount combines both ring and base mounting; This innovative design streamlines the installation process while ensuring maximum stability and alignment for mounted optics, enhancing overall shooting precision and consistency
- SCOPE POSITIONING - With the capability to provide up to 2 inches of forward scope positioning, the P.E.P.R. mount delivers adequate clearance and optimal eye placement; This feature promotes comfortable shooting ergonomics to maintain proper eye relief
- VERSATILITY - Designed to accommodate various scope types and mounting preferences, the Burris P.E.P.R. Scope Mount includes both smooth & Picatinny ring tops; This versatile configuration ensures compatibility with a wide range of optics and accessories
- BURRIS - Burris has built a reputation for some of the most solid, reliable rings, mounts, and bases on the market; Our quality rings, mounts, and bases are vital to getting and staying on target, round after round
10. Monstrum Defcon Series Cantilever Scope Mount | 30 mm Diameter
- Next generation of Monstrum Scope Mounts with a new ultra-lightweight design, sleeker more aggressive machining, and more mounting options
- Lightweight design, evolved over several generations of Monstrum scope mount products, brings the weight down to a mere 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25% lighter than our previous generation scope mounts
- 2 inch forward offset rings for more flexible scope placement. Available for both 1 inch, 30 mm, and 34 mm diameter rifle scope tubes.
- Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- All Monstrum products are backed by a lifetime guarantee
Peter
Related Posts
- Best Bulk Cat6 Ethernet Cable
- Best Matrixyl 3000 Serum
- Best Ergonomic Keyboard And Mouse For Carpal Tunnel Syndrome
- Best Beet Juice To Drink
- Best Self Closing Toilet Seat
- Best On Amino Energy Flavor
- Best Goatee Shaper
- Best 13×19 Photo Printer
- Best Lte Antenna
- Best Mouse Ultrasonic Repeller
- Best Product For Bruises
- Best Washing Machine No Vibration
- Best Soundbar With Alexa Built In
- Best Borescope For Automotive
- Best Garage Door Opener App Iphone
- Best Diesel Scanner
- Best Anti Mold Bath Mat
- Best Tabletop Gaming Mats
- Best Leave In Heat Protectant For Fine Hair
- Best Paint Sprayer For Deck Stain