You will find our hand-picked selection of Best Water-based Paver Sealer below. You have a wide variety of choices of brands such as Foundation Armor,MasonryDefender,Ghostshield,McKinnon Materials available to you as a result of the fact that each one of them has a unique pricing, look, and feel. Continue reading for an in-depth analysis in our Best Water-based Paver Sealer buying guide!
Our experts tested a variety of Best Water-based Paver Sealer on the market. Right at the top of the list is Foundation Armor Best Water-based Paver Sealer. Check out some more of our favorites below, and read some valuable insight from our experienced editors.
Editor's Choice
5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer,
Premium Pick
Low Gloss Patio Paver Sealer, 1 gal - Clear Water-Based Sealant for Natural Stone Surfaces
Budget Pick
McKinnon Concrete Sealer, Paver Sealer 5 Gallon, Penetrating High Gloss Wet Look, Outdoor/Indoor,
Top 10 Best Water-based Paver Sealer
We researched and compared the top products in the Best Water-based Paver Sealer category to provide you with these recommendations.
1. 5-Gal. SX5000 WB DOT Approved Water Based Silane Siloxane Penetrating Concrete Sealer, Brick Sealer,
- Water based, breathable, high solids Silane Siloxane sealer that can be used on interior and exterior, vertical and horizontal concrete, brick, and pavers.
- Approved by the DOT as a water repellent sealer and can provide up to 10 years of performance.
- Will maintain the natural, unsealed look and feel of the substrate.
- Will reduce damage caused by snow and ice, road salts, mold and mildew, and staining.
2. Low Gloss Patio Paver Sealer, 1 gal - Clear Water-Based Sealant for Natural Stone Surfaces
- Invisible Waterproofing Protection - Milky white in appearance when first applied, and dries clear
- Non-Yellowing, Clear, Water-Based, VOC Compliant Acrylic Sealer - Low Odor and Easy Cleanup with Soap & Water
- Helps Prevent Color Loss on Patio Stone Pavers
- Ready to Use - No Mixing Required - Easy to Apply with a Pump Up Sprayer
- Provides a Low-Gloss Finish to Patio Paver Stones (Does not leave a high gloss finish on your paver stones but rather, a rich angular sheen that protects your pavers from fading and hardens, or stabilizes the joint sand. The amount of sheen will vary, based on the porosity of the pavers).
3. Siloxa-Tek 8500 Ready to Use - 1 Gallon Penetrating Concrete Sealer, Water and Salt Repellent.
- Siloxa-Tek 8500 is a water-based, silane/siloxane engineered to reduce water and moisture intrusion. Will not change the aesthetics, leaving your concrete, pavers, brick and stone with its original natural appearance. This low VOC formula is 100% breathable and non film forming (meaning it will never peel flake or delaminate).
- Siloxa-Tek 8500 is D.O.T (Department of Transportation) approved and resists surface damage caused by chlorides and deicing salts. It mitigates cracking, spalling and pitting and protects against surface degradation from freeze thaw damage.
- Siloxa-Tek 8500 is a supercharged penetrating sealer with 6x higher actives than any other water based concrete sealer on the market for long lasting protection that actually last. Resists wind driven rain.
- Siloxa-Tek 8500 is a commercial grade, impregnating sealer for commercial and residential applications. Its high actives formula is UV stable and will not break down from direct sunlight. There is no change to the surface profile ensuring a non slick surface. Siloxa-Tek 8500 is the next generation of impregnating sealers with smaller active particles for even deeper penetration for unrivaled protection.
- Excellent water beading effect, easy application with sprayer, roller or brush. Use on driveways, garages, basements, patios, pool decks. Covers up to 250 square feet per gallon per coat. If installed by certified applicator vertical applications can last up to 10 years before reapplication is required.
4. McKinnon Concrete Sealer, Paver Sealer 5 Gallon, Penetrating High Gloss Wet Look, Outdoor/Indoor,
- INDUSTRIAL GRADE, PROFESSIONALS CHOICE: Concrete Sealer and Paver Sealer for both Outdoor and Indoor Applications. Our Water-based modified Acrylic is specifically formulated for both unsealed and previously sealed (with a water-based concrete sealer).
- DURABILITY: Our formula WILL NOT PEEL OR CRACK!
- VERSATILITY: Our Sealer is PERFECT for use with the widest selection of substrates like Concrete/Cement, Pavers, Stone, Natural Stone, Rock, Limestone, Flagstone, Pool Decks, Brick, and even Stucco!
- CRYSTAL COAT WEATHER SHIELD: Forget about sealing again for up to 5 years!
- CRYSTAL CLEAR: Our water-based modified acrylic formula dries absolutely crystal clear within 8 hours!
- REVIVE: Bring back your old weathered surfaces with our Sealer!
5. MasonryDefender Low Gloss Patio Paver Sealer - Clear Water-Based Sealant for Patio Pavers & Natural
- CLEAR WATERPROOF SEALER: This water based acrylic sealer goes on milky white and dries clear, providing a rich, low-gloss sheen that enhances and protects your surfaces from fading; it is VOC-compliant and prevents color loss without yellowing
- JOINT SEALING AND SAND LOCK: Our paver patio sealer seals joints by hardening and stabilizing the joint sand, helping to prevent weed growth and ant colonization
- USE ON THESE SURFACES: This product is perfect for clay brick, clay paver stones, cement paver stones and natural stone and can be used on most types of horizontal, above grade concrete applications
- COVERAGE: Covers 75-150 sq ft per gallon; no mixing required, simply use a pump-up sprayer to apply to stone surfaces and then back brush for even application; allow it to dry and then apply second coat, dry time will normally take 1-2 hours
- EASY TO CLEAN: This paver sealant delivers a subtle, low gloss finish with low odor, and it's easy to clean up with soap and water
6. Armor SX5000 WB Water-Based Silane-Siloxane Sealer for Concrete, Brick, Pavers, Stone - Matte
- PROFESSIONAL GRADE SILANE SILOXANE SEALER: The Armor SX5000 WB is a professional-grade water-based silane siloxane sealer designed for use on unsealed concrete, brick, paver, bluestone, flagstone, slate, natural stone, and masonry.
- REDUCES WATER ABSROPTION BY UP TO 95%: The Armor SX5000 WB chemically reacts to form a water-repellent barrier below the surface that will reduce the absorption of water and other liquids by up to 95%.
- WONT CHANGE THE LOOK OR COLOR: Formulated with high-quality US-manufactured resins, the Armor SX5000 WB is designed to protect concrete, brick, pavers, stone, and masonry without changing the look, color, or feel. The substrate will look and feel exactly as it did before it was sealed!
- LONG LASTING PROTECTION: The Armor SX5000 WB Silane-Siloxane concrete sealer chemically reacts to form a water-repellent barrier below the surface that can last for up to 7-10 years. By reducing the absorption of water through the surface, damage caused by water absorption is also reduced. Sealed surfaces are more resistant to cracking, spalling, ice damage, salt damage, organic surface growth, and staining.
- READY TO USE: The Armor SX5000 WB is ready-to-use and can be applied to a properly cleaned and prepped unsealed surface with pump sprayer. One gallon covers up to 175-225 square feet per gallon. Foundation Armor cleaners and sprayers are available separately.
- EASY TO MAINTAIN: The Armor SX5000 WB works entirely below the surface so there is no surface film or coating to maintain. When it is time to reseal, simply apply 1-2 coats of the Armor SX5000 WB to a clean, dry, and absorbent surface with a pump sprayer.
- WATER BASED FORMULA: The Armor SX5000 WB is water-based. It is easy to use, 0 VOC, and has no odor. Clean-up is quick and easy, and can be done with soap and water.
7. 5 Gal. DOMINATOR LG+ Clear Acrylic Sealer | Low Gloss Paver Sealer | Wet Look, Color Enhancing |
- COLD WEATHER WARNING: Do not apply if surface temperature is expected to be below 50 for 48 hours before & after application. ENHANCE the life and beauty of your surface (wet look) and a low gloss finish for 2-4 years before the need to reseal (depending on your environment).
- Protects against oil stains and other spills while providing the ultimate weather resistance on surfaces including concrete pavers and decorative concrete. Not intended for stone or clay.
- Great coverage rate: 250-400 square feet per gallon, per coat. You will save money and time by reducing maintenance when you seal with DOMINATOR LG+.
- Breathe easy with DOMINATOR LG+ concrete sealer's water-based formula. No harsh odors and low VOCs (Volatile Organic Compounds) makes application pleasant and easy.
- Easy spray on application using our Quick Start guide (included in every purchase) and How To videos. DOMINATOR LG+ has an incredibly fast dry time between coats making it an easy one-day project, unlike some competitors.
8. Premium Stone Sealer, 1 Gallon – Max Gloss Wet Look for Pavers, Driveways & Patios – Waterproof
- Max High-Gloss Wet Look: Transform your stone surfaces with a dazzling, mirror-like finish that enhances color vibrancy by 200%, delivering a stunning wet-look effect. Perfect for patios, driveways, walkways, and garden pavers, it instantly elevates outdoor spaces with a luxurious, high-end aesthetic. Ideal for modern designs where visual impact matters.
- Waterproof & UV Resistant Pro: Our advanced nano-penetrating formula creates an invisible shield that blocks water absorption, preventing freeze-thaw damage, salt erosion, and efflorescence. It also filters out 98% of harmful UV rays, protecting against fading, discoloration, and surface degradationextending stone lifespan by 3X while maintaining its natural beauty. NOTE: IT IS NOT SUITABLE FOR POLISHED STONE OR TILE.
- 3-in-1 Easy Application, No Hassle: Designed for both professionals and DIY enthusiasts! Apply effortlessly via spray, roller, or brushsurface dries in just 30+ minutes with no special equipment needed. Works on porous surfaces like natural stone (granite, limestone, slate), concrete, and masonry, boosting application efficiency by 50% for faster, smoother results. NOTE: PLEASE ALWAYS TEST A SMALL AREA BEFORE USE ON FULL SECTION
- Reduces Cleaning Effort: Thanks to its excellent stain resistance, this sealer effectively repels dirt and stains, making your stone surfaces easier to clean. Youll discover that cleaning tasks become much simpler, significantly reducing the time and effort required for maintenance, allowing you to spend more time enjoying life rather than worrying about upkeep.
- Long-Lasting Protection, 1-3 Years: A single application delivers industry-leading durability, proven by 2,000+ hours of accelerated weathering tests. Resists abrasion, chemical exposure, and extreme weather, outperforming standard sealers. Significantly reduces reapplication frequency, saving time and money while keeping your stone pristine for years.
9. Armor WB25 Water Based High Gloss Acrylic Concrete Sealer and Cure and Seal - 5 Gallon
- Meets ASTM 1315 and ASTM C 309 standards
- Protective surface film will reduce damage caused by water absorption and surface abrasion
- Made from non-recycled US manufactured resins
- Will enhance concrete and pavers with a high gloss finish
- Will last for up to 1-3 years before the need for a recoat
10. 1 Gal. DOMINATOR SG+ Clear Acrylic Sealer | High Gloss Paver Sealer | Wet Look, Color Enhancing |
- COLD WEATHER WARNING: Do not apply if surface temperature is expected to be below 50 for 48 hours before & after application. ENHANCE the life and beauty of your surface (wet look) and a high gloss finish for 2-4 years before the need to reseal (depending on your environment).
- PROTECTS against oil stains and other spills while providing the ultimate weather resistance on surfaces including concrete pavers and decorative concrete. NOT intended for stone or clay.
- GREAT COVERAGE RATE: 250-400 square feet per gallon, per coat. You will save money and time by reducing maintenance when you seal with DOMINATOR SG+.
- Breathe easy with DOMINATOR SG+ concrete sealer's water-based formula. No harsh odors and low VOCs (Volatile Organic Compounds) makes application pleasant and easy.
- EASY spray on application using our Quick Start guide and How To videos. DOMINATOR SG+ has an incredibly fast dry time between coats (45 min.) making it an easy one-day project, unlike some competitors.
Peter
Related Posts
- Best Drugstore Eye Primer For Mature Skin
- Best Green Coffee Extract
- Best Fishing Pole For Trolling
- Best Powdered Eggs Review
- Best Egf
- Best Poker Tables
- Best Dvd Projector
- Best Rear Bag For Benchrest Shooting
- Best Full Extension Soft Close Drawer Slides
- Best Zero Gap T-outliner
- Best Clear Sticker Paper For Cricut
- Best Charging Station Organizer
- Best Soft Sided Tackle Bag
- Best 1000w Led Grow Light
- Best Green Screen For Zoom Meetings
- Best Rechargeable Aaa Batteries For Cordless Phones
- Best Batman Shirts
- Best Password Books
- Best Orange Bitters
- Best Fiberglass Resin For Boats