You will find our hand-picked selection of Best Dust Collection Hose below. You have a wide variety of choices of brands such as Peachtree Woodworking Supply,Fulton,Fulton Woodworking Tools available to you as a result of the fact that each one of them has a unique pricing, look, and feel. Continue reading for an in-depth analysis in our Best Dust Collection Hose buying guide!
Our experts tested a variety of Best Dust Collection Hose on the market. Right at the top of the list is Peachtree Woodworking Supply Best Dust Collection Hose. Check out some more of our favorites below, and read some valuable insight from our experienced editors.
Editor's Choice
10 Foot Long Dust Collection Power Tool Hose Kit with 6 Threaded Fittings/Attachments for Multiple
Premium Pick
2 1/2" x 20' Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2" Ports. Ideal
Budget Pick
4" x 20’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Top 10 Best Dust Collection Hose
We researched and compared the top products in the Best Dust Collection Hose category to provide you with these recommendations.
1. 10 Foot Long Dust Collection Power Tool Hose Kit with 6 Threaded Fittings/Attachments for Multiple
- The smaller diameter 1-3/16" O.D. (Outside diameter) flexible dust collection power tool hose moves freely when connected to your power tools and vacuum. This gives you the ability to plug into different tools to add dust collection at a moments notice. The hose and its specialized fittings work with multiple power tools, workshop vacuums, jigs and other tools around your woodworking shop or work shop.
- The small rubber fitting threads on to the end of the hose and is ideal for connecting random orbital sanders, palm sanders, biscuit joiners or any other power tool with smaller dust collection ports. The small thread-on rubber fitting has a 1 inch I.D. with a 1-3/16 inch taper up to 1-1/4 inch O.D. This kit will also work with popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage
- The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!
- Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 2 each small flexible rubber thread-on fitting, 2 each large flexible rubber thread-on fitting and 2 each Plug-in Adaptor shop vacuum that will allow you to connect the hose to most commercial or residential workshop vacuum ports.
- IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS: Before placing an order, please check the inner and outer (I.D. and O.D.) diameter of your workshop vacuum ports and power tool ports to make sure the hose and fittings will properly fit and work for your needs. THE I.D. AND O.D. ON THE RUBBER END FITTINGS AND HOSE ARE APPROXIMATE SIZES AND MAY SLIGHTLY VARY.
2. 2 1/2" x 20' Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2" Ports. Ideal
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see whats going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
3. 4" x 20’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see whats going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
4. 2-1/2 inch Diameter by 10 foot Long PVC Dust / Debris Collection Hose MADE IN THE USA with 2 each
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
5. 4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see whats going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
6. 4" x 50’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see whats going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
7. 4 inch Diameter by 10 foot Long PVC Dust / Debris Collection Hose MADE IN THE USA with 2 each 4 inch
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it wont completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it wont flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- 304 STAINLESS STEEL HOSE CLAMP- The 4 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
8. POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black
- PLEASE NOTE: As configured, the hose set will connect your 1OD port tools to a shop vac or 2-1/2 dust collection system. The hose is designed to be small and flexible to help provide greater ease in sanding. Please refer to the detailed images to verify that the size and configuration fits your application or expectations. If you need to connect your shop vac or 2-1/2 dust collection system to a 1-1/2 tool port, an additional 1-1/2 screw on adapter, Powertec 70296, is available. Simply remove the 1ID adapter and replace it with the additional 1-1/2 ID adapter
- INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter
- APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris
- VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-1/4 adapter should fit most shop vac ports with a nominal ID of 2-1/4. Shop Vac ports sizes can vary between different manufacturers. Please refer to the actual adapter sizes before ordering, to verify that it will work for your application
- DIMENSIONS: Dust collector hose 1-3/16" O.D x 10ft long | ABS vacuum dust hose adapter nominal 2-1/2" O.D actual 2-27/64| ABS vacuum dust hose adapter nominal 2-1/4" O.D actual 2-19/64 |Small pliable plastic fitting 1" I.D | Large pliable plastic fitting 1-1/2" I.D
9. POWERTEC 70143 PVC Dust Collection Hose (4 Inch x 20 Feet), Flexible Clear View Heavy Duty PVC Hose
- Includes (one) 4" diameter 20 feet long left spiral clear flexible hose
- Made from high quality PVC for durability, strength and easy installation
- Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability
- Perfect for any clear view dust collection system allowing you to monitor dust/ debris separation and vapor/ smoke filtration
- Ideal for an assortment of sawdust collectors, air conditioning indoor ventilation ducts and 4 PVC dust collection systems for woodworking applications
10. Cen-Tec Systems 94698 Quick Click 10 Ft. Hose for Home and Shop Vacuums with Expanded Multi-Brand
- 1-1/4" diameter x 10-foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with , 1, 1-1/4, 1- internal and external connections for dust collection
- The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting
- Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, and bayonet fittings with , 1, 1-1/4, 1- soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool
- Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric
- The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2 " vacuum connection
- Expanded version of Cen-Tec's popular 94192 dust collection hose with additional , 1-1/4 power tool adapters, and additional 2 " shop vacuum adapter
- The inner collar and extra-durable acetal clip ring are designed to fit to tools directly that accept a quick click collar connection. The collar connector is 1-3/4" on the outer diameter with the acetal clip designed to snap into place on power tools fitted for this feature
- Additional 2 " cuff mounted on a bayonet allows the operator to use dust collection workstations with home shop vacuums popular with table saws
- The soft TPE of the fitting allows the fitting to form to the shape of the exhaust port off of the selected power tool
- The Cen-Tec proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum
Peter
Related Posts
- Best Potato Dicer
- Best Rca Interconnects
- Best Uv Air Purifier For Hvac System
- Best Cb Radio For Truckers
- Best Portable Mechanics Tool Box
- Best Interior Brick Sealer
- Best 7 Inch Car Radio
- Best Bolt Action Pens
- Best Moringa For Breastfeeding
- Best Probiotics Consumer Reports
- Best Gps Antenna
- Best Cheap Micro Atx Case
- Best Lithium Battery Charger 12v
- Best Switch Oled Grips
- Best Sony Soundbar With Subwoofer
- Best Volume Root Spray
- Best Hot Dog Chili Store Bought
- Best Ar 15 Multi Tool
- Best Utv Trail Tire
- Best Launch Obd2 Scanner