With so many great Best Table Saw Taper Jig to pick from, like those from brands such as Fulton,POWERTEC,MICROJIG,Deadwood Crafted Tools, it can be tricky for customers to decide what to buy. But after extensive research, we’ve discovered the stand-out Best Table Saw Taper Jig currently on the market.
Our team rigorously tested numerous products available to consumers. The one that stands at the top of our list is Fulton Best Table Saw Taper Jig, thanks to its impressive performance and features. Below you’ll find more of our top-rated picks, along with insightful analysis from our seasoned experts. Check out their thoughts before making your purchasing choice. With this guide backing your decision, you’re sure to end up with a Best Table Saw Taper Jig you’ll love.
Editor's Choice
Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long
Premium Pick
POWERTEC 71395 Taper/Straight Line Jig for Table Saws with 3/4” Wide by 3/8” Deep Miter Slot
Budget Pick
POWERTEC 71035V Table Saw Angle Cutting Jig for Creating Tapered Cuts | 24-Inch Lightweight Aluminum
Top 10 Best Table Saw Taper Jig
We researched and compared the top products in the Best Table Saw Taper Jig category to provide you with these recommendations.
1. Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long
- Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
- The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
- Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
- Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
- Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
2. POWERTEC 71395 Taper/Straight Line Jig for Table Saws with 3/4” Wide by 3/8” Deep Miter Slot
- ASSEMBLY CONTAINS: 36 Miter Bar, Base, Adjustable Fence, Knob, Hold Down Clamps, Tape Measure, Abrasive Grip Strips, T-Bolts, Hardware Screws, Washers and Mini Screw Driver
- FUNCTIONS: Primarily serves as a taper cutting jig for table saw Secondarily operates as a stable straight line ripping jig Your creativity is the limit
- FEATURES: A safe and easy-to-use design, indexing marks for easy angle setting, 5 star knobs and hold down clamps to prevent shifting stock, abrasive grip strips to help stabilize your workpiece and detailed instructions for all skill levels
- PREMIUM BUILD: This woodworking taper jig is manufactured with high quality components; The base measures 32 x 7-7/8 with MDF construction and melamine coating on both sides
- VERSATILE: Perfect for cutting tapered compound angles, straight line table saw ripping, making handmade furniture, and a wide range of applications such as making chair legs, building tables, custom built shelves or base cabinets and more. PLEASE NOTE: It fits tight and securely in any standard 3/8" x 3/4" miter slot.
3. POWERTEC 71035V Table Saw Angle Cutting Jig for Creating Tapered Cuts | 24-Inch Lightweight Aluminum
- INCLUDES: (1) Table Saw Taper Cutting Jig with 24 rails with work stops, ergonomic handle, lock knob and laser etched scale
- FUNCTION: Used as a taper cutting guide for table saws, this easy-to-use carpentry tool helps you make long cut cuts at angles from 1 per foot (4.8 degrees) or up to 3 per foot (15 degrees)
- VERSATILE: Perfect for making angled cuts, projects that require a little taper or other woodworking projects such as building kitchen table legs, chairs, wood shelves, wedges and more.
- PREMIUM: Made with an extremely durable, yet lightweight extruded aluminum construction that offers anti-corrosive properties and a high strength-to-weight ratio for heavy-duty applications
- FEATURES: Sturdy construction and design with extruded legs with anodized finish, tapered handle with rounded head and textured finish, improved laser engraved 17 gauge steel hinge plate
4. POWERTEC 71035 Table Saw Angle Cutting Jig for Creating Tapered Cuts | 24-Inch Lightweight Aluminum
- INCLUDES: (1) Table Saw Taper Cutting Jig with 24 rails with work stops, ergonomic handle, lock knob and laser etched scale
- FUNCTION: Used as a taper cutting guide for table saws, this easy-to-use woodworking tool helps you to make long rip cuts at angles from 1 per foot (4.8 degrees) or up to 3 per foot (15 degrees)
- VERSATILE: Perfect for making angled cuts, projects that require slight tapers or other woodworking projects such as building kitchen table legs, chairs, wooden racks, wedges, and more
- PREMIUM: Made with a highly durable, yet lightweight aluminum extrusion construction that offers anti-corrosive properties and a high strength-to-weight ratio for heavy duty applications
- FEATURES: Sturdy construction and design with extruded legs with an anodized finish, a tapered handle with a round head and textured finish, plush an improved laser etched 17 gauge steel hinge plate
5. MICROJIG GRR-RIPPER TJ-5000 Microdial Tapering Jig For Table Saws, Yellow
- The Most PRecise, Versatile Tapering Jig
- The MICRODIAL gauge locks in exact incremental taper angles
- Precision tapered cutting as accurate as 1/8 of degree
- Works with the GRR-RIPPER 3D PUSHBLOCK system for ultimate safety and control
- Set your taper angle by degree or rise and run for last cutting
6. DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial
- NO MORE GUESSING: The DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More allows for complete workpiece control when making taper or angle cuts on any radial-arm or table saw; Making a taper on a piece of wood is difficult with only a table saw and dangerous attempting free-hand, so this jig with a removable and adjustable stop allows you to make tapers safely and accurately; Easily taper table legs or use for construction and remodeling
- VARIOUS TAPERS APPLICATIONS: Reversible for left-hand or right-hand operation so anyone can cut out items like tapered table legs, tapered waste baskets, magazine racks, molding cuts, and dado cuts; The thumb wing nut enables fine adjustment of the jig for all applications up to 24 inches (length of jig legs)
- ACCURATE MEASUREMENT: Includes an easy-to-read graduated scale that measures up to 3 inches per foot or 15 degrees of taper; Gauge allows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper
- EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the marked angle, adjusted taper width until both measurements are equal, set the taper guide against the fence and board against taper guide, align marked angle line to saw blade, and cut moving both the taper guide and wood piece along saw
- CONTENTS: Package includes (1) pair of jig legs, (1) scale, (1) locking bracket, (1) work stop, (1) handle, assembly hardware, and assembly instructions; Wood and saw required, not included
7. Taper Jig • Straight Line Ripping Jig for Table Saws with a 3/4” Wide by 3/8” Deep Miter Slot
- If you have ever had difficulty cutting long tapers on your table saw, this simple to use taper jig will help make that process easy and it will help you do it accurately! Featuring the Blade Safe and Short Reach Adjustable Hold Down clamps, this jig is the perfect way to cut chair legs, table legs, furniture angles and a whole lot more!
- The jig comes with a x 3/8 lightweight aluminum miter bar that features two steel removable slot discs. There is a disc on either end to prevent any incidental lift out of the slot. For those saws that dont have a T- Slot, the discs may be removed. The miter bar also features spring loaded steel plungers to ensure a snug fit into x 3/8 miter slots. Simply use the provided hex key wrench to adjust the plungers to achieve the ideal fit.
- The Taper Jig also features an easy to use indexing system that helps make quick work of taper cuts. Each index mark equals 1 degree of taper. You may of course simply mark your wood, align your marks with the edge of the taper jig, clamp down your wood using the Blade Safe Hold Down Clamps and make the cut if so desired. The choice is yours. The Taper Jig comes with detailed, full color instructions for safe and accurate jig use.
- You can also use the Taper Jig as a straight line ripping jig to give your stock a straight, true edge. To do this, simply remove the miter bar, zero out the jig and use your table saw fence as your guide for the jig. Please take note that the jig has been designed to be use on table saws in which the left edge of the right side miter slot is 4 to 6-1/2 from the blade.
- We have included 3 Blade Safe and Short Reach Adjustable Hold Down clamps that come in super handy when clamping your stock to the jig. Each clamp can be adjusted inward or outward depending on how close or how far it needs to reach to hold down your stock. Unlike other taper jigs, our clamps are made from a composite material that will NOT damage your blade or cutters if accidentally cut into! This material also prevents accidental tripping of touch sensitive, safety table saw mechanisms.
8. Rockler Taper Jig / Straight Line Jig - Power Tool Accessory Jigs Makes Tapered Cuts Fast - Wood
- Rocklers Taper & Straight Line Jig: The taper drill jig allows you to make tapered cuts quickly, easily, and accurately at your table saw. With the miter bar removed, this wood working jig also doubles as a stable, straight-line ripping jig.
- Easy To Fit: This straight-line hole jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. The guidance booklet in our jig table saw is available so you can make it your very own.
- Multipurpose Drill Jig For Angled Holes: With a simple indexed angle setting system, heavy-duty hold-down clamps, and a smooth sliding design, the table saw jig makes tapered cuts fast, easy, and more precise. Our jig tools are perfect for chair legs, table legs, and more.
- Easy To Setup: In tapering mode, these woodworking tools and accessories are intended for use in the miter slot to the right of the blade. On many saws, your initial cut will remove a narrow piece of the tablesaw jigs base to create zero-clearance support
- Where To Work? These wood working tools works with table saws on which the left edge of the right miter slot is 3-3/4 to 4-3/8 from the blade or 5 to 5-5/8 from the blade.
9. Cowryman Saw Gauge Stainless Steel Woodworking Tools Table Saw Fence Alignment Jig Table Saw Dial
- Package includes 4*9mm Ball + 4*12mm Ball + 1*Stainless steel square bar +1*Stainless steel round bar + 1*Dial indicator
- Perfect for your table saw alignment, fence alignment
- Perfect for most miter grooves
- Extension bar can be purchased separately
- 1" capacity dial indicator reads in .001" increments
10. Taper Jig Mini for Smaller Precision Taper Cuts on Table Saws
- Peachtrees Taper Jig Mini has been designed to help you cut smooth, precise tapers on your table saw. Cut tapers for table legs, sofas, occasional tables, segmented turning projects, birdhouses, clocks and a whole lot more! For the super practical and often necessary projects, the Taper Jig Mini is great for churning out a fist full of shims or opposing wedge blocks for holding your work in place!
- Easy to store, easy to take with you and easy to use especially on smaller table saws. The included aluminum miter bar can be positioned in three different spots on the base to accommodate a wide range of table saws. The miter bar has adjustable set screws to help remove any side to side play. The miter bar is the industry standard x 3/8 to fit most table saws. If the miter bar doesnt fit your saw, it can be replaced with a miter bar that does.
- Easy to store, easy to take with you and easy to use especially on smaller table saws. The included aluminum miter bar can be positioned in three different spots on the base to accommodate a wide range of table saws. The miter bar has adjustable set screws to help remove any side to side play. The miter bar is the industry standard x 3/8 to fit most table saws. If the miter bar doesnt fit your saw, it can be replaced with a miter bar that does.
- Also made of a composite material and for the very same reason as the clamps, is the adjustable stop. Lets face it, weve all done it where we set a jig or fixture for one project and forget to re-adjust for the next project. If the stop is projecting past the base it will get cut into. We specifically made this stop to take the cut as opposed to damaging your valuable table saw blade.
- The Taper Jig Mini also features large, easy to grip knobs and handles. The base has reference marks at inch intervals for and easy setup process. Also included are two anti-slip abrasive strips to keep the adjustable fence from slipping while in use. The base is laminated and protected with a slick melamine surface that also helps prevent bowing and warping. The MDF base provides zero-clearance support for clean, smooth cuts. The base is approx. 7-1/4''W x 11-1/2''L x 1/2'' thick.
Peter
Related Posts
- Best Vegetable Supplement Pill
- Best Gel Blaster Gun
- Best Rated Ladder Tree Stands
- Best Bottle Opener For Bartenders
- Best Washing Machine For Pet Hair
- Best Concrete Coating For Pool Deck
- Best Ethernet To Hdmi Adapter
- Best Dual Control Electric Blanket
- Best White Toner
- Best Galvanized Spray Paint
- Best Cac Card Holder
- Best Outdoor Home Pest Control
- Best Fat Suits
- Best Shoe Inserts For Leg Pain
- Best Pot Watering System
- Best Stinging Nettle Supplement
- Best Diy Speaker Kit
- Best Usb Expansion Card
- Best Drip Emitters For Vegetable Garden
- Best Acne System For Teens